NC State
BioResources
Fonseca de Lima, M. T., Lima Aguiar, J. R., De Araujo, V., de Sousa Moreira, T. A., and Viana de Souza, M. (2026). "Pathological manifestations in wood structures of Amazonian stilt houses: A case study in Itaituba, PA, Brazil," BioResources 21(4), 11946–11974.

Abstract

Pathological Manifestations in Wood Structures of Amazonian Stilt Houses: A Case Study in Itaituba, PA, Brazil

Wood structures used in stilt houses are exposed to environmental conditions in the Amazon that favor degradation processes. Such degradation may compromise durability, performance, and safety. This study evaluated pathological manifestations in the wood structures of stilt houses located in the Jardim das Araras neighborhood in Itaituba, Pará state, Brazil, to analyze the maintenance conditions and practices adopted by residents. The research was designed as a qualitative, descriptive case study based on in situ visual inspection of 10 stilt houses, photographic records, structured interviews with housing users, and prioritization using the GUT Matrix (Gravity, Urgency, and Trend). Eleven pathological manifestations were identified, including mold fungi, degradation at the bases and tops of pillars, longitudinal cracks, decay fungi, rupture and displacement of structural elements, visible beam deformation, and member instability. The questionnaire results showed the predominance of corrective maintenance, with 70% of residents reporting that they replace components only after visible defects appear. Moisture exposure, biological agents, and insufficient preventive maintenance were associated with the deterioration observed. Periodic inspections and preventive actions were recommended to the users, with priority given to critical support elements.


Download PDF

Full Article

Pathological Manifestations in Wood Structures of Amazonian Stilt Houses: A Case Study in Itaituba, PA, Brazil

Maria Tamiris Fonseca de Lima ,a José Renato Lima Aguiar ,a

Victor De Araujo ,b Thiago Augusto de Sousa Moreira ,c

and Matheus Viana de Souza a,*

Wood structures used in stilt houses are exposed to environmental conditions in the Amazon that favor degradation processes. Such degradation may compromise durability, performance, and safety. This study evaluated pathological manifestations in the wood structures of stilt houses located in the Jardim das Araras neighborhood in Itaituba, Pará state, Brazil, to analyze the maintenance conditions and practices adopted by residents. The research was designed as a qualitative, descriptive case study based on in situ visual inspection of 10 stilt houses, photographic records, structured interviews with housing users, and prioritization using the GUT Matrix (Gravity, Urgency, and Trend). Eleven pathological manifestations were identified, including mold fungi, degradation at the bases and tops of pillars, longitudinal cracks, decay fungi, rupture and displacement of structural elements, visible beam deformation, and member instability. The questionnaire results showed the predominance of corrective maintenance, with 70% of residents reporting that they replace components only after visible defects appear. Moisture exposure, biological agents, and insufficient preventive maintenance were associated with the deterioration observed. Periodic inspections and preventive actions were recommended to the users, with priority given to critical support elements.

DOI: 10.15376/biores.21.4.11946-11974

Keywords: Wood structures; Stilt houses; Wood deterioration; Building pathology; Maintenance; GUT Matrix

Contact information: a: Federal University of Western Pará (UFOPA), Itaituba Campus, Universitária, S/N, Maria Magdalena, CEP 68183-300, Itaituba, Pará, Brazil; b: Postgraduate Program in Civil Engineering, Faculty of Engineering of Ilha Solteira, São Paulo State University “Júlio de Mesquita Filho” (UNESP), 550 Alameda Bahia, Ilha Solteira, Brazil; c: Federal University of Western Pará (UFOPA), Santarém Campus, Engineering and Earth Sciences Institute, Rua Vera Paz,s/n, 68040-255, Santarém, Pará, Brazil; *Corresponding author: [email protected]

Graphical Abstract

Pathological Manifestations in Wood Structures of Amazonian Stilt Houses: A Case Study in Itaituba, PA, Brazil

INTRODUCTION

In civil engineering, pathological manifestations correspond to anomalies, failures, or defects capable of compromising the performance, durability, and safety of buildings. In wood structures, these manifestations are especially relevant because of the organic origin and hygroscopic nature of wood, which promotes moisture exchange with the environment and affects its physical and mechanical properties (Brito 2014; Shimbo and Ino 2024).

Wood degradation results from an interaction among construction-related, environmental, and use-related factors. Detailing failures, prolonged moisture exposure, lack of preservative treatment, and insufficient maintenance can favor symptoms such as cracks, deformations, staining, decay, and loss of mechanical resistance of structural members (Brito 2014; De Paula et al. 2021).

Among deterioration agents, biotic agents are particularly important, especially decay fungi and xylophagous insects. These organisms degrade the main constituents of wood (cellulose, hemicellulose, and lignin), reducing wood mass, stiffness, and load-bearing capacity (Dumankaya et al. 2025; Silva et al. 2024). Fungal decay can occur in different forms, such as brown rot, associated mainly with cellulose degradation, and white rot, associated with lignin consumption. In parallel, xylophagous insects, such as subterranean termites and powderpost beetles, may attack the internal portions of members by opening galleries, which makes early identification of the damage more difficult (Brito 2014). Table 1 shows the risk classes of xylophagous organisms according to the wood use conditions.

Table 1. Risk Classes for Visual Inspection of Wood Structures According to Environmental Exposure Conditions

Risk Classes for Visual Inspection of Wood Structures According to Environmental Exposure Conditions

Abiotic agents, including solar radiation, thermal variations, excessive moisture, and weathering, also contribute to surface changes, cracking, roughness, and increased permeability. Although such factors do not always destroy wood by themselves, they increase susceptibility to biological attack and accelerate mass loss and the reduction of physical and mechanical properties (Martins and Fioriti 2016; Castro and Guimarães 2018).

In the Amazonian context, stilt houses represent a vernacular housing typology that is adapted to the dynamics of water, allowing occupation of flood-prone and floodplain areas. However, their primary structural elements-especially pillars, piles, and beams-are frequently exposed to moisture, soil, and freshwater. According to the risk classification proposed by Brito (2014), this condition corresponds to a high-risk exposure class for biodeterioration.

Beyond environmental exposure, the vulnerability of stilt houses is related to precarious construction, deficient urban infrastructure, and the accumulation of residues in areas where moisture is retained. Under such conditions, preventive maintenance and the control of biodeteriorating agents become essential strategies to preserve safety, performance, and service life (Brito 2014; Grecco 2024).

Interventions in wood structures may include corrective actions, such as replacement of members with substantial loss of cross section, local reinforcement, and rehabilitation of deteriorated components, as well as preventive measures such as moisture control, periodic cleaning, drainage improvement, separation of wood from permanent water sources, and the use of preservative treatments compatible with the exposure class (Brito 2014).

Although studies have addressed wood deterioration, structural pathology, and Amazonian stilt-house architecture, few investigations integrate, in the same analytical procedure, visual inspection of wood members, residents’ perceptions, and hierarchical prioritization of pathological manifestations to guide maintenance actions in urban Amazonian stilt houses. This gap is relevant because maintenance in these dwellings often occurs reactively and is conditioned by community resources and practical knowledge.

Based on this gap, the objective of this study was to diagnose and prioritize pathological manifestations in wood structures of stilt houses located in the Jardim das Araras neighborhood, Itaituba, Pará, Brazil, through in situ visual inspection, photographic records, questionnaires applied to residents, and the GUT Matrix. The study also sought to relate the observed damage to maintenance conditions and to propose intervention priorities compatible with the Amazonian floodplain context.

EXPERIMENTAL

Study Design

This study was designed as qualitative, descriptive, and applied research conducted through a case study. The methodological procedure was structured to allow the diagnosis to be reproduced in other stilt-house areas. It included spatial delimitation, unit selection, non-destructive visual inspection, photographic recording, questionnaire application, classification of pathological manifestations, and prioritization using the GUT Matrix. Table 2 summarizes the adopted stages.

Spatial Delimitation of the Study Area

The Jardim das Araras neighborhood (Fig. 1a), located in a riverine floodplain area in the municipality of Itaituba, Pará, Brazil, was selected as the spatial scope of this research. The neighborhood was intentionally selected because of the presence of traditional and hybrid stilt houses, proximity to the Tapajós River, and recurrent exposure to moisture and flooding conditions, all of which are directly associated with the deterioration of wood structures.

Table 2. Summary of the Methodological Procedure Adopted in the Study

Summary of the Methodological Procedure Adopted in the Study

Aerial photos of Jardim das Araras neighborhood, Itaituba, Brazil: (a) spatial delimitation and (b) stilt-house sample. Source: Google Earth, adapted by the authors (2026)

Fig. 1. Aerial photos of Jardim das Araras neighborhood, Itaituba, Brazil: (a) spatial delimitation and (b) stilt-house sample. Source: Google Earth, adapted by the authors (2026)

The sample consisted of 10 housing units (Fig. 1b), identified as P1 to P10. The selection considered the presence of wood structural elements accessible to visual inspection, proximity to areas influenced by water, and the possibility of interviewing the resident. Because this is a qualitative case study, the results are not intended for statistical generalization, but they allow the identification of deterioration and maintenance patterns in a representative local context.

All 10 units used timber as the primary load-bearing material and presented an elevated post-and-beam structural arrangement, with floor and roof loads transferred through timber members and beams to vertical pillars or piles and then to the supporting ground. This load path was interpreted qualitatively from the visible structural arrangement; no structural load calculations were performed. Localized construction hybridization was recorded in six units: five had masonry bathrooms and one had a masonry cesspit, whereas four remained entirely timber. These masonry components were localized and did not replace the primary timber support system.

Although the questionnaire asked how long each stilt house had existed, exact construction dates were not independently verified by documentary records. Construction period was therefore not used as a quantitative comparison variable, and this is treated as a limitation of the sample characterization.

The hydrological behavior of the Tapajós River was considered as an environmental contextual variable. According to Santos et al. (2025), the flood period occurs between January and May, when the river level may reach approximately 10.0 m, while the falling-water period extends from July to November, with minimum levels close to 2.5 m. Such oscillation favors wetting and drying cycles in wood members, especially in the lower portions of the stilt houses.

In Situ Visual Inspection

The in situ visual inspection was performed as a non-destructive procedure based on a protocol adapted from Brito (2014) and Lucena and Lima (2024). In each unit, pillars, piles, beams, floors, guardrails, enclosures, wood-soil/water interfaces, and areas with moisture accumulation were prioritized (Fig. 2a). The evidence was recorded photographically and linked to the corresponding stilt-house identification. Height measurements (Fig. 2b) were made with a measuring tape, allowing an approximate altimetric variation to be observed among the structures: stilt houses in areas more prone to flooding had heights between 4 m and 6 m, whereas units in less affected areas had heights between 1.5 m and 3 m.

Assessment in stilt house sample: (a) visual inspection of lower elements and (b) altimetric measurement. Source: Authors (2026)

Fig. 2. Assessment in stilt house sample: (a) visual inspection of lower elements and (b) altimetric measurement. Source: Authors (2026)

Questionnaire Application

Using the same sample adopted for the visual inspection, a structured questionnaire was applied to residents of the 10 evaluated units (Appendix). The instrument included questions on length of residence, wood used, origin of the material, frequency of replacement of boards and pillars, period of repairs, parts considered most critical, treatments applied to new wood, presence of mixed materials, and residue accumulation. The interviews were conducted face-to-face, individually, and without nominal identification of respondents. The answers were tabulated as absolute and relative frequencies, always considering the small sample size (n = 10). Therefore, the percentages presented are descriptive and are used to support the qualitative interpretation of the maintenance and conservation patterns observed during the inspections.

GUT Matrix and Data Processing

After the inspection, the pathological manifestations were cataloged according to their occurrence in the evaluated units and associated with the photographic records in the Appendix. The GUT Matrix was then applied, following procedures used in studies that prioritize pathological manifestations (De Paula et al. 2021; Brito 2023). This tool ranks problems according to three criteria: Gravity, Urgency, and Trend (Table 3).

Table 3. GUT Matrix Scoring Criteria

GUT Matrix Scoring Criteria

In the present study, Gravity and Urgency were treated as distinct dimensions. Gravity expresses the potential consequence of an observed condition for durability, functionality, or structural safety if it remains unresolved, whereas Urgency expresses the time available before technical intervention is required. Thus, a condition may have high gravity without requiring immediate action, while another may warrant urgent action because of active progression. Trend represents the expected rate of worsening under the observed exposure conditions.

Each manifestation was evaluated based on the available visual evidence, considering the potential damage, the affected element, the possibility of progression, and the consequence for building performance. Because the same manifestation was observed in different stilt houses, the GUT score was assigned by type of pathological manifestation rather than by isolated photograph, which allowed the criticality of the damage to be compared in a standardized way.

The criticality index was calculated as the product G x U x T. In addition, an accumulated index was calculated for each stilt house by summing the GUT scores of all manifestations present in that unit. This procedure does not replace a detailed structural assessment, but it provides an indication of the units that require priority technical inspection.

To reduce classification subjectivity, uniform operational criteria were adopted: Gravity received a higher score when there were indications of compromised load-bearing elements, loss of section, rupture, deformation, or instability; Urgency increased when the damage indicated the need for short-term repair; and Trend received a higher score when active moisture, infestation, progressive cracking, or environmental conditions favorable to aggravation were observed. Thus, manifestations scoring 125 were classified as critical and requiring priority intervention; scores from 64 to 80 indicated high criticality and the need for monitoring and repair planning; and scores below 64 were interpreted as lower relative priority, without excluding the need for periodic follow-up.

The GUT scores were assigned from the technical visual inspection by the research team and were not derived from the residents’ questionnaire responses. Resident perceptions were used only as complementary information for triangulation with the field diagnosis.

RESULTS AND DISCUSSION

Mapping of Pathological Manifestations in Stilt Houses

Eleven pathological manifestations were identified and cataloged in wood elements. These manifestations were associated with 28 photographic records obtained during the visual inspection and presented in the Appendix. Table 4 lists the manifestations observed in the evaluated stilt houses.

Table 4. Pathological Manifestations Identified in the Stilt Houses

Pathological Manifestations Identified in the Stilt Houses

The most frequent occurrences were staining/mold fungi and degraded bases and tops of pillars. Both of these were recorded in all 10 units evaluated (10/10). This result indicates generalized action of moisture and biological agents in zones of contact with soil, water, and exposed surfaces. Deep longitudinal cracks in pillars (8/10) and decay fungi in beams and pillars (7/10) were also frequent, indicating progressive impairment of load-bearing elements.

Visible beam deformation (2/10), member instability (3/10), and deterioration due to excessive moisture (2/10) occurred less frequently, but not necessarily with lower relevance because they were associated with localized structural risk. Thus, recurrence analysis was interpreted together with the GUT Matrix criticality scores, avoiding underestimation of severe but less frequent damage.

Representative field photographs of six of the identified manifestations are shown in Fig. 3; the complete photographic record of all 11 manifestations is retained in the Appendix.