Abstract
Cellulosic pulps were prepared from Stellera chamaejasme roots using soda, soda-anthraquinone (soda-AQ), and kraft pulping processes. S. chamaejasme is composed of 73.5% holocellulose, 39.7% α-cellulose, and 17.6% lignin, similar to wheat straw and other non-wood plant materials. The ethanol–benzene extractives content of 9.2% is higher than other non-woods. The conditions used for all pulping experiments were as follows: a liquid/solid ratio of 5:1; a time-to-maximum temperature of 100 min; a maximum temperature of 160 °C; and a time-at-maximum temperature of 50 min. The results showed that the pulp yield was 31.27 to 36.83%, the kappa number was 16.32 to 19.42, and the pulps’ intrinsic viscosity was 854 to 976 mL/g. Tear index, tensile index, burst index, and brightness of the papers made from the above unbleached pulps were 12.60 to 13.62 mN•m2/g, 20.57 to 22.56 mN/g, 2.16 to 2.38 kPa•m2/g, and 15.3 to 18.3%, respectively.
Download PDF
Full Article
Stellera chamaejasme Roots as Raw Material for Pulp Production
Haichao Li,a,c,* Huizhen Sun,b Ling Pu,a and Zhibin He c
Cellulosic pulps were prepared from Stellera chamaejasme roots using soda, soda-anthraquinone (soda-AQ), and kraft pulping processes. S. chamaejasme is composed of 73.5% holocellulose, 39.7% α-cellulose, and 17.6% lignin, similar to wheat straw and other non-wood plant materials. The ethanol–benzene extractives content of 9.2% is higher than other non-woods. The conditions used for all pulping experiments were as follows: a liquid/solid ratio of 5:1; a time-to-maximum temperature of 100 min; a maximum temperature of 160 °C; and a time-at-maximum temperature of 50 min. The results showed that the pulp yield was 31.27 to 36.83%, the kappa number was 16.32 to 19.42, and the pulps’ intrinsic viscosity was 854 to 976 mL/g. Tear index, tensile index, burst index, and brightness of the papers made from the above unbleached pulps were 12.60 to 13.62 mN•m2/g, 20.57 to 22.56 mN/g, 2.16 to 2.38 kPa•m2/g, and 15.3 to 18.3%, respectively.
Keywords: Stellera chamaejasme; Pulping; Kraft process; Soda process; Soda-AQ process
Contact information: a: College of Chemistry and Life Science, QingHai Nationalities University, XiNing 810007, China; b: Center of Ecology, Northeast Forestry University, Harbin 150040, China; c: Limerick Pulp and Paper Center, University of New Brunswick, Fredericton E3B 5A3, Canada;
* Corresponding author: mailoflhc@gmail.com
INTRODUCTION
Largely due to ecological degradation, there has been massive growth of some toxic plants and deserts in China’s Qinghai-Tibet Plateau grasslands. Stellera chamaejasme L., known as “LangDu” in Chinese, is a well-known toxic plant in the north and northwest parts of China, and it belongs to a class of plants with severe poison content (Klein et al. 2007; Zhang et al.2010; Xu et al. 2007 ). S. chamaejasme has been used for a long time in traditional Chinese medicine as an herbal remedy for scabies, tinea, and tuberculosis. Recently, it has been found to exhibit antitumor, antiviral, and anti-HIV activities (Feng et al. 2002). The bioactivity chemical constituents of the roots of this plant are mainly of terpenoids, biflavonoids, and lignans (Liu et al. 2012b). Excessive consumption and prolonged contact with S. chamaejasme for people can also cause severe poisoning; therefore, proper protections such as gas masks and protective suits in the harvesting and production processes of this plant might be needed (Sun 1996). S. chamaejasme generally has a large deep root. The S. chamaejasme growing area was estimated to be 0.47 million ha in the Qinghai province (Li et al. 2009).
Figure 1 shows S. chamaejasme in the field. Its total biomass in Qinghai is about 400 million tons. The management of this plant and the potential to make value-added products from it is considered an essential part in the local agricultural community.
Significant effort has been made in extracting compounds/chemicals that are of medicinal value; however, this only accounts for about 1% of the total mass (Jin et al. 1999; Xu et al. 2001; Feng et al. 2002; Tang and Hou 2008; Sun et al. 2009; Tsolmon et al. 2010; Liu et al. 2012a;). Other uses for the remaining 99% of this biomass are needed. Converting it to a cellulosic pulp for paper products may be an option to be further exploited.
Fig. 1. S. chamaejasme on the shore of Qinghai Lake
About a thousand years ago, people living on the Qinghai-Tibet Plateau had already started to use S. chamaejasme as a raw material for the production of handmade Tibetan-paper. Nowadays its manufacture technology is very fastidious and highly traditional, and mainly includes debarking, mashing, cooking, refining, and papermaking. Tibetan hand-made paper has made important contributions to the social, economic, and cultural development in the region. Many scriptures of Buddhism, printed on Tibetan paper, have been well-preserved for hundreds of years in Kumbum Monastery, Jokhang Temple, and other Tibetan Buddhism temples (Dege Sutra-Printing House 2014). Handmade Tibetan paper production gradually decreased and eventually stopped due to the emerging modern paper industry in the region. In 1998, the production of handmade Tibetan-paper was restarted at Dege Sutra-Printing House. There are some unique characteristics of the paper made from S. chamaejasme. For instance, it has anti-moth properties: books, such as scriptures of Buddhism, printed on Tibetan-paper can be stored for a long time without damage induced from chewing by insects; it also has good strength properties and good ink absorbency (Li et al. 2009a). The morphology of S. chamaejasme root fiber was investigated by Li et al. (2009b), and was found to have an average length of 0.95 mm, an average width of 18.8 μm, an average cell wall thickness of 6.7 μm, and a fines fraction of 42.26% in the raw material.
Nowadays, non-woods fibers have become one of the important alternative sources of fibrous material for the 21st century (Ashori and Bahreini 2009). The objective of the present work is to determine the potential for converting S. chamaejasme to pulp. Traditional pulping processes, such as kraft, soda, and soda-AQ, were evaluated.
EXPERIMENTAL
Materials
Preparation of raw material
S. chamaejasme root samples of about 200 kg were collected from the southeast shore of Qinghai Lake (36°9′ E; 100°1′ N, in Qinghai province of China) and dried naturally for about 20 days after washing. The whole root was used for the analysis of its chemical constituents. All raw material samples were stored in sealed plastic bags after being chipped into 4- to 6-cm chips. Figure 2 shows whole and sectional views of the samples.
Methods
Characterization of the raw material
The chemical composition of S. chamaejasme was determined in accordance with the test methods described in the standards of the Technical Association of Pulp and Paper Industry (TAPPI 1992): T-203, T-204, T-211, T-222, and T-207. These tests were used for α-cellulose, ethanol-benzene extractives, and ash, lignin, and hot-water solubles, respectively. Holocellulose was analyzed based on the chlorite method of Wise et al. (1946).
Pulping
Cooking was performed using a 3 L electrically heated laboratory digester. Pulping conditions used for the kraft cooks were as follows: 15% active alkali; 20% sulfidity; liquid/solid ratio of 5:1; time-to-maximum temperature of 100 min; maximum temperature of 160 °C; and time-at-maximum temperature of 50 min. Soda and soda-AQ pulping was also performed under the same conditions as above for kraft except that no sodium sulfide (i.e., 0% sulfidity) was used; the soda-AQ pulping used 1% AQ. After pulping, the cooked materials were defibrillated in a disintegrator at 1100 rpm for 15 min and thoroughly washed. The pulp was then refined in a standard PFI mill (Noram Quality Control and Research Equipment Ltd., Canada) at 3000 rpm to reach a freeness of 33 oSR from soda process, 30 oSR from soda-AQ process and 34 oSR from kraft process, and the pulp was screened on a 0.15-mm mesh screen.
Fig. 2. S. chamaejasme root samples
Analyses and characterization
The pulp samples obtained were characterized to determine pulp yield (gravimetrically), kappa number (T-236 cm-85), and viscosity (T-230 om-94) (TAPPI 1992).
Pulp handsheets were prepared using a sheet former (Noram Quality Control and Research Equipment Limited, Canada), and the strength properties were determined in accordance with TAPPI standard methods, including tensile (T-494), burst (T-403), and tear (T-414) indices, as well as brightness (T-452) (TAPPI 1992).
RESULTS AND DISCUSSION
Raw Material Characterization
The chemical constituents of S. chamaejasme root are shown in Table 1. Included in the table are those of other non-wood species reported in the literature (Jiménez et al. 1990; López et al. 2004; 2005; Alaejos et al. 2006; Wan Rosli et al. 2007; Rodríguez et al. 2008), and aspen (Law and Jiang 2001). S. chamaejasme root has a holocellulose content of 73.5%, which is higher than that of the other non-wood species listed and is slightly lower than that of aspen (77.8%). The α-cellulose content of S. chamaejasme is 39.7%, which is similar to that of rice straw, but slightly lower than that of aspen wood. Removal of lignin is a major objective of the pulping and bleaching processes. The lignin content of S. chamaejasme is 17.6%, which is similar to that of both rice straw and trembling aspen. Based on the lignin content level, S. chamaejasme can be expected not to require high reaction times or chemical concentrations (Rodríguez et al. 2008).
Table 1. Chemical Constituents Comprising Various Raw Materials
The extractives content (i.e., ethanol-benzene extractables) of a lignocellulosic material is a measure of substances such as waxes, fats, resins, low-molecular-weight carbohydrates, salts, and other water-soluble substances. S. chamaejasme contains 9.2% ethanol-benzene extractables, which is higher than that of the agricultural residues and wood species. For some substances, including resins, waxes, and fatty acids, an alkaline pulping process, such as soda or kraft, can effectively remove them (Rodríguez et al. 2008).
Pulping Results
The yield, kappa number, and intrinsic viscosity of the pulps obtained from different pulping processes are shown in Table 2. For comparison, the corrected pulp yield (to a kappa number of 16.32) was also made so that the small difference in pulp yield from the difference in lignin content could be taken into consideration according to Ji et al.(2009) and Liu et al. (2012b).
Table 2. Properties of Pulp from S. chamaejasme
The highest yield (36.83%, with the corrected pulp yield of 36.36% at a kappa number of 16.32) was obtained from the kraft process, while the lowest kappa number (16.32%) was gained from the soda-AQ process. The kraft pulp had the highest intrinsic viscosity (976 mL/g).
As given in Table 2, the yields for S. chamaejasme root pulp were not high. These yield results were compared to the literature results of other non-woods: 32.12% from vine shoots from the soda process (Jiménez et al. 2006); 47.0% from Eucalyptus citriodora from the kraft process (Khristova et al. 2006); and 55.0% from holm oak from the soda-AQ process (Alaejos et al. 2006).
The delignification degree for the three processes employed was reasonable, and the resulting pulps had a range of kappa numbers from 16 to 19. In the literature, various results have been reported: a bagasse sample gave a kappa number of 10.3 from the soda-AQ pulping process (Xilin et al. 1997); an abaca sample gave a kappa number of 10.6 from the soda pulping process (Jiménez et al. 2005); a rice straw sample gave a kappa number of 21.05 from the kraft pulping process (Rodríguez et al. 2008); a holm oak sample gave a kappa number of 23.7 from the soda-AQ pulping process (Alaejos et al. 2006); and a wheat straw sample gave a kappa number of 31 from the kraft pulping process (Deniz et al. 2004).
The intrinsic viscosities of the pulps were in the range of 854 to 976 mL/g. These viscosity results were compared to the literature results: 1189 mL/g from holm oak from the soda-AQ pulping process (Alaejos et al. 2006); 1428 mL/g from abaca from the soda pulping process (Jiménez et al. 2005); 929 mL/g from eucalyptus from the soda-AQ pulping process (Khristova et al. 2006); and 732 mL/g from rice straw from the soda-AQ pulping process (Rodríguez et al. 2008).
Handsheet Properties
The pulp samples obtained from the soda, soda-AQ, and kraft processes were made into handsheets, and the tensile index, burst index, tear index, and brightness were determined. The results are shown in Table 3.
The highest tear index (13.62 mN•m2/g) was obtained from pulp handsheets from the pulp obtained using a soda process, the highest tensile index (22.56 mN/g) was obtained from pulp handsheets from the pulp obtained using a soda-AQ process, and the highest burst index (2.38 kPa•m2/g) was obtained from pulp handsheets from the pulp obtained using a kraft process. Conversely, all pulp handsheets obtained by the various processes had low brightness values.
Table 3. Properties of Pulp Handsheets from S. chamaejasme
The tensile index of the S. chamaejasme pulp was in the range of 20.57 to 22.56 mN/g, which is rather typical from non-wood pulps. In the literature, various results have been reported: 11.6 mN/g for holm oak trimmings pulped by soda-AQ and 14.9 mN/g for holm oak trimmings pulped by kraft (Alaejos et al. 2006); and 46.6 mN/g for Eucalyptus tereticornis pulped by kraft and 47.3 mN/g for Eucalyptus tereticornis pulped by soda-AQ (Khristova et al. 2006).
The burst index of the S. chamaejasme pulp was in the range of 2.16 to 2.38 kPa•m2/g. These burst indices were compared to the literature results: 1.4 kPa•m2/g for eucalyptus from the kraft pulping process (Khristova et al. 2006); 9.17 kPa•m2/g for bagasse from the soda-AQ pulping process (Xilin et al. 1997); 4.09 kPa•m2/g for wheat straw from the kraft pulping process (Deniz et al. 2004); and 1.01 kPa•m2/g for vine shoots from the soda pulping process (Jiménez et al. 2006).
The tear index of the S. chamaejasme pulp was in the range of 12.6 to13.62 mN•m2/g. These tear indices were compared to the literature results: 19.03 mN•m2/g for abaca pulped by soda (Jiménez et al. 2005), 7.26 mN•m2/g for bagasse pulped by soda (Xilin et al. 1997); 1.9 mN•m2/g for Eucalyptus citriodora pulped by kraft (Khristova et al. 2006); 4.57 mN•m2/g for wheat straw pulped by kraft (Deniz et al. 2004); and 0.90 mN•m2/g for vine shoots pulped by soda (Jiménez et al. 2006).
The brightness of the S. chamaejasme root pulp from the processes studied was in the range of 15.3 to 18.3% ISO. The soda-AQ process gave the highest brightness of 18.3% ISO, which is in agreement with the lowest kappa number as shown in Table 1. These results may be compared with the literature results: 22.3% ISO for Eucalyptus citriodora kraft pulp (Khristova et al. 2006); 24.1% ISO for holm oak soda-AQ pulp (Alaejos et al. 2006); 42.2% ISO bagasse soda-AQ pulp (Xilin et al. 1997); and 48% ISO for rice straw soda-AQ pulp (Rodríguez et al.2008).
CONCLUSIONS
- The chemical constituents of S. chamaejasme root are as follows: 73.5% holocellulose, 39.7% α-cellulose, and 17.6% lignin. It is noted that the holocellulose content is comparable to that of various non-woods, indicating that S. chamaejasme root is a potential raw material for lignocellulosic paper production.
- The experimental results from the soda, soda-anthraquinone (soda-AQ), and kraft processes showed that the pulp quality of S. chamaejasme roots was similar to that of wheat straw pulp from the same processes: the yield is 31.27 to 36.83%, the kappa number is 16.3 to 19.42, and the intrinsic viscosity of pulps is 854 to 976 mL/g. The tear index, tensile index, burst index, and brightness of the pulp handsheets are 12.60 to 13.62 mN•m2/g, 20.57 to 22.56 mN/g, 2.16 to 2.38 kPa•m2/g, and 15.3 to 18.3%, respectively.
- Based on these results, it was concluded that the kraft process gave the best pulp yield, while the strength properties were similar for the pulps from the three processes.
- The present study implied that a holistic utilization of S. chamaejasme and the biomass for pulp production can be of practical interest. Such an approach can contribute to the ecological/sustainable management of toxic plants in the grassland of the Qinghai-Tibet region in China.
ACKNOWLEDGMENTS
The authors thank Drs. Qiang Wang, Kai Liu, and Qun Li (Limerick Pulp and Paper Center, UNB) for useful discussions. Financial support was provided by the National Natural Science Foundation of China, Grant No. 30760195, and the Fundamental Research Funds for the Central Universities of NEFU, Grant No. DL11CB10.
REFERENCES CITED
Alaejos, J., López, F., Eugenio, M. E., and Tapias, R. (2006). “Soda-anthraquinone, kraft and organosolv pulping of holm oak trimmings,” Bioresour. Technol. 97(16), 2110-2116.
Ashori, A., and Bahreini, Z. (2006). “Non-wood fibers – A potential source of raw material in papermaking,” Polym. Plast. Technol. Eng. 45 (10), 1133-1136.
Dege Sutra-Printing House. (2014). http://www.degeparkhang.org/index-en.htm, Accessed March 2014.
Deniz, I., Kirci, H., and Ates, S. (2004). “Optimization of wheat straw Triticum drum kraft pulping,” Ind. Crops Prod. 19(3), 237-243.
Feng, B. M., Pei, Y. H., and Hua, H. M. (2002). “Chemical constituents of Stellera chamaejasme L,” J. Asian Nat. Prod. Res. 4(4), 259-263.
Ji, Y., Vanska, E., and van Heiningen, A. (2009). “Rate determining step and kinetics of oxygen delignification,” Pulp & Paper Canada 110(3), 29-35.
Jiménez, L., Sánchez, I., and López, F. (1990). “Characterization of Spanish agricultural residues with a view to obtaining cellulose pulp,” TAPPI J. 73(8), 173-176.
Jiménez, L., Ramos, E., Rodríguez, A., de la Torre, M. J., and Ferrer, J. L. (2005). “Optimization of pulping conditions of abaca. An alternative raw material for producing cellulose pulp,” Bioresour. Technol. 96(9), 977-983.
Jiménez, L., Angulo, V., Ramos, E., de la Torre, M. J., and Ferrer, J. L. (2006). “Comparison of various pulping processes for producing pulp from vine shoots,” Ind. Crops Prod. 23(2), 122-130.
Jin, C., Michetich, R. G., and Daneshtalab, M. (1999). “Flavonoids from Stellera chamaejasme,” Phytochem. 50(3), 505-508.
Khristova, P., Kordsachia, O., Patt, R., and Dafaalla, S. (2006). “Alkaline pulping of some eucalypts from Sudan,” Bioresour. Technol. 97(4), 535-544.
Klein, J. A., Harte, J., and Zhao, X. (2007). “Experimental warming, not grazing, decreases rangeland quality on the Tibetan Plateau,” Ecol. Appl. 17(2), 541-557.
Law, K. N., and Jiang, X. (2001). “Comparative papermaking properties of oil palm empty fruit bunch,” TAPPI J. 84(1), 1-13.
Li, H. C., Sun, H. Z., and Xu, G. Y. (2009a). “Tibetan paper from Stellera chamaejasme and reclamation of poisonous plants in grassland,” J. Tibet Univ. 24(1), 1-4.
Li, H. C.,Yu, G., and Qi, Z. X. (2009b). “Fiber characterization of Stellera chamaejasme L. root and Tibetan paper,” Paper Science& Technology 28(2), 6-8.
Liu, J., Hu, H. C., and Luo, X. L. (2012a). “Development of a novel empirical model to estimate the kraft pulp yield of fast-growing eucalyptus, ” BioResources 7(1), 1134-1144.
Liu, L. P., Wang, X. Y., and Wang, H. B. (2012b). “A new lignan from the roots of Stellera chamaejasme,” Chem. Nat. Compd. 48(4), 559-561.
López, F., Alfaro, A., García, M. M., Díaz, M. J., Calero, A., and Ariza, J. (2004). “Pulp and paper from tagasaste,” Chem. Eng. Res. Des. 82(A8), 1029-1036.
López, F., Eugenio, M. E., Díaz, M. J., Nacimiento, J. A., García, M. M., and Jiménez, L. (2005). “Soda pulping of sunflower stalks. Influence of process variables on the resulting pulp,” J. Ind. Eng. Chem. 11(3), 387-394.
Rodríguez, A., Moral, A., Serrano, L., Labidi, J., and Jiménez, L. (2008). “Rice straw pulp obtained by using various methods,” Bioresour. Technol. 99(8), 2881-2886.
Sun, G., Luo, P., Wu, N., Qiu, P. F., Gao,Y. H., Chen, H., and Shi, F. S. (2009). “Stellera chamaejasme L. increases soil N availability, turnover rates and microbial biomass in an alpine meadow ecosystem on the eastern Tibetan Plateau of China,” Soil Biol. Biochem. 41(1), 86-91.
Sun, Y. M. (1996). “Report of seven people acute poisoned by S. chamaejasme,” Chinese Journal of Industrial Medicine 9(6), 378.
Tang, X., and Hou, T. (2008). “Development of chamaejasmin microemulsion and its biological activity against Aphis craccivora and Culexpipiens pallens,” Flavour Fragr. J. 23(4), 258-262.
TAPPI. (1992). TAPPI Test Methods, TAPPI Press, Atlanta, GA.
Tsolmon, S., Han, J., and Isoda, H. (2010). “Inhibition of cell growth by Stellera chamaejasme extract is associated with induction of autophagy and differentiation in chronic leukemia K562 cells,” J. Biosci. Bioeng. 110(2), 262-268.
Wan Rosli, W. D., Zainuddin, Z., Law, K. N., and Asro, R. (2007). “Pulp from oil palm fronds by chemical processes,” Ind. Crops Prod. 25(1), 89-94.
Wise, L. E., Murphy, M., and D’Addieco, A. A. (1946). “Chlorite holocellulose, its fractionation and bearing on summative wood analysis and on studies on the hemicelluloses” Paper Trade J. 122(2), 35-42.
Xilin, L., Simmonds, S. H., Belayachi, L., and Delmas, M. (1997). “Sweet sorghum bagasse: A raw material for the production of chemical paper pulp. Effect of depithing,” Ind. Crops Prod. 6(3-4), 229-232.
Xu, Y., Su, C. J., and Zhang Y. C. (2007). “Toxic plant resources in Panxi area,” Wuhan University Journal of Natural Sciences 12(4), 762-768.
Xu, Z. H., Qin, G. W., and Xu, R. S. (2001). “A new biocoumarin from Stellera chamaejasme L,” J. Asian Nat. Prod. Res. 3(4), 335-340.
Zhang, Y. Z., Volis, S., and Sun, H. (2010). “Chloroplast phylogeny and phylogeography of Stellera chamaejasme on the Qinghai-Tibet Plateau and in adjacent regions,” Mol. Phylogenet. Evol. 57(3), 1162-1172.
Article submitted: March 26, 2014; Peer review completed: June 7, 2014; Revised version received: June 12, 2014; Accepted: June 14, 2014; Published: June 25, 2014.