Editorial Board
Latest articles
Zhang, J., Wang, T., Tang, X., Peng, L., Wei, J., and Lin, L. (2018). "Methods in the synthesis and conversion of 2,5-Bis-(hydroxylmethyl)furan from bio-derived 5-hydroxymethylfurfural and its great potential in polymerization," BioRes. 13(3), Page #s to be added.Curti, R., Marcon, B., Denaud, L., and Collet, R. (2018). "Effect of grain direction on cutting forces and chip geometry during green beech wood machining," BioRes. 13(3), 5491-5503.
View our current issueCo-Editors
- Lucian A. Lucia, Ph.D.
Department of Forest Biomaterials, NC State University, Raleigh, NC - Martin A. Hubbe, Ph.D.
Department of Forest Biomaterials, NC State University, Raleigh, NC
Associate Editors
- Fa-Chuang Lu, Ph.D. – Regional, Asia
South China University of Technology, Guangzhou, China - Shubin Wu, Ph.D. – Print Edition
State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, China
Overview
Members of the Board are expected to provide general input to the Co-Editors, read annual reports to the Board, and be available for occasional reviewing of submitted articles. Members of the Editorial Board also are encouraged to submit review articles, using the template provided to match the required format.
International Editorial Board
- Said Abubakr, Ph.D.
Department of Chemical and Paper Engineering, Western Michigan University, Kalamazoo, MI - M. Hakki Alma, Ph.D.
Department of Forest Industry Engineering, Kahramanmaraş Sütçüimam University, Kahramanmaraş, Turkey - Thomas E. Amidon, Ph.D.
Department of Paper and Bioprocess Engineering, SUNY College of Environmental Science and Forestry, Syracuse, NY - Maria Cristina Area, Ph.D.
Department of Industry and Environment, The National University of Misiones, Posadas, Argentina - Dimitris Argyropoulos, Ph.D.
Department of Forest Biomaterials, NC State University, Raleigh, NC - David L. Ashcraft
College of Natural Resources, NC State University, Raleigh, NC - Pramod K. Bajpai, Ph.D.
Department of Chemical Engineering, Thapar Centre for Industrial Research and Development, Patiala, India - Sujit Banerjee, Ph.D.
Institute of Paper Science and Technology, Georgia Institute of Technology, Atlanta, GA - Angeles Blanco, Ph.D.
Departament of Chemical Engineering, Complutense University of Madrid, Madrid, Spain - Shiyu Fu, Ph.D.
State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, China - Gil Garnier, Ph.D.
Department of Chemical Engineering, Monash University, Clayton, Australia - Paul Gatenholm, Ph.D.
Department of Chemical and Biological Engineering, Chalmers University of Technology, Gothenburg, Sweden - Syed Hadi Hasan, Ph.D.
Indian Institute of Technology, Banaras Hindu University, Varanasi, India - Beihai He, Ph.D.
State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, China - Thomas Heinze, Ph.D.
Department of Organic Chemistry, University of Jena, Jena, Germany - John A. Heitmann, Ph.D.
Department of Forest Biomaterials, North Carolina State University, Raleigh, NC - Carl Houtman, Ph.D.
Forest Products Laboratory, USDA Forest Service, Madison, WI - Samuel Hudson, Ph.D.
Department of Textile Engineering, Chemistry and Science, NC State University, Raleigh, NC - Anna-Stiina Jääskeläinen, Ph.D.
VTT Technical Research Centre of Finland, Espoo, Finland - D. Steven Keller, Ph.D.
Department of Chemical, Paper and Biomedical Engineering, Miami University of Ohio, Oxford, OH - Stephen S. Kelley, Ph.D.
Department of Forest Biomaterials, NC State University, Raleigh, NC - Seung Wook Kim, Ph.D.
Department of Chemical and Biological Engineering, Korea University, Seoul, Korea - Takuya Kitaoka, Ph.D.
Department of Agro-environmental Sciences, Kyushu University, Fukuoka, Japan - Marie-Pierre Laborie, Ph.D.
Institute of Forest Utilization and Works Science, University of Freiburg, Freiburg, Germany - Kwei Nam (Ken) Law, Ph.D.
Research Center in Pulp and Paper, University of Quebec at Trois-Rivières, Trois-Rivières, QC, Canada - Hak Lae Lee, Ph.D.
Department of Forest Sciences, Seoul National University, Seoul, Korea - Yoon Y. Lee, Ph.D.
Department of Chemical Engineering, Auburn University, Auburn, AL - Carsten Mai, Ph.D.
Department of Wood Biology and Wood Products, University of Göttingen, Göttingen, Germany - Behdad Moghtaderi, Ph.D.
Department of Chemical Engineering, The University of Newcastle, Callaghan, Australia - Leonard Y. Mwaikambo, Ph.D.
Department of Mechanical and Industrial Engineering, University of Dar es Salaam, Dar es Salaam, Tanzania - Kien Loi Nguyen, Ph.D.
Australian Pulp and Paper Institute, Department of Chemical Engineering, Monash University, Clayton, Australia - Ian Parker, Ph.D.
Australian Pulp and Paper Institute, Department of Chemical Engineering, Monash University, Clayton, Australia - Joel J. Pawlak, Ph.D.
Department of Forest Biomaterials, NC State University, Raleigh, NC - Haisong Qi, Ph.D.
South China University of Technology, Guangzhou, China - Omid Ramezani, Ph.D.
Department of Cellulose and Paper Technology Engineering, Shahid Beheshti University, Tehran, Iran - Luiz Pereira Ramos, Ph.D.
Department of Chemistry, Federal University of Parana, Curitiba, Brazil - Timothy G. Rials, Ph.D.
Department of Forestry, Wildlife and Fisheries, Tennessee Forest Products Center, University of Tennessee, Knoxville, TN - Orlando J. Rojas, Ph.D.
Department of Bioproducts and Biosystems, Aalto University, Helsinki, Finland - Mohini Sain, Ph.D.
Center for Biocomposites and Biomaterial Processing, Faculty of Forestry, University of Toronto, Toronto, Ontario, Canada - Lennart Salmen, Ph.D.
Innventia, Stockholm, Sweden - Carmen Sanchez, Ph.D.
Biotechnology Laboratory, Research Center for Biological Sciences, Autonomous University of Tlaxcala, Tlaxcala, Mexico - Amar Singh Singha, Ph.D.
Department of Chemistry, National Institute of Technology, Hamirpur, India - Narongrit Sombatsompop, Ph.D.
Polymer Processing and Flow Group, School of Energy, Environment, and Materials, King Mongkut’s University of Technology Thonburi (KMUTT), Thungkru, Bangkok, Thailand - Run-Cang Sun, Ph.D. – Regional, Asia
Beijing Forestry University, Beijing, China - Mohammad J. Taherzadeh, Ph.D.
Professor of Bioprocess Technology, School of Engineering, University of Borås, Borås, Sweden - Carmen-Alice Teacă, Ph.D.
Senior Researcher, “Petru Poni” Institute of Macromolecular Chemistry, Iasi, Romania - Theo van de Ven, Ph.D.
Department of Chemistry, McGill University, Montreal, Canada - Adriaan van Heiningen, Ph.D.
Department of Chemical Engineering, University of Maine, Orono, ME - Wan Rosli Wan Daud, Ph.D.
School of Industrial Technology, Universiti Sains Malaysia, Penang, Malaysia - Xiaohui Wang, Ph.D.
South China University of Technology, Guangzhou, China - Charles E. Wyman, Ph.D.
Chemical and Environmental Engineering Department, University of California Riverside, Riverside, CA - Feng Xu, Ph.D.
Institute of Biomass Chemistry and Technology, Beijing Forestry University, Beijing, China - Stefan Zauscher, Ph.D.
Department of Mechanical Engineering and Materials Science, Duke University, Durham, NC - Elisa Zeno, Ph.D.
Center for Paper Technology, Grenoble, France - Huaiyu Zhan, Ph.D.
State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, China - Xiao Zhang, Ph.D.
Washington State University, Tri-Cities, Richland, WA - Junyong Zhu, Ph.D.
U.S. Department of Agriculture, Forest Products Laboratory, Madison, WI - Shengdong Zhu, Ph.D.
School of Chemical Engineering and Pharmacy, Wuhan Institute of Chemical Technology, Wuhan, China