Abstract
This study aimed to determine the most suitable woody species that can be used to reduce the pollution of Sr, Mo, and Sn, which are heavy metals that are harmful to the ecosystem and human and environmental health. Within the study’s scope, samples were taken from the wood parts of 16 woody species growing under similar conditions in Düzce province, which is among the five cities with the most polluted air in Europe. The wood part is the largest organ of higher plants in terms of mass; it traps heavy metals within itself for many years and can remove heavy metals to a great extent. Therefore, plants with a high potential for heavy metal accumulation in the wood part are among the most suitable plants for phytoremediation studies. The study determined Sr, Mo, and Sn concentrations in the wood parts of 16 tree species via inductively coupled plasma optical emission spectroscopy and compared them using statistical methods. Results indicate that Robinia pseudoacacia and Cedrus atlantica species were suitable for reducing pollution by Mo and Sn, while Platanus orientalis and Populus alba species were suitable for reducing Sr pollution.
Download PDF
Full Article
Determination of Sixteen Woody Species’ Ability to Sequester Sr, Mo, and Sn Pollutants
Nurcan Yiğit *
This study aimed to determine the most suitable woody species that can be used to reduce the pollution of Sr, Mo, and Sn, which are heavy metals that are harmful to the ecosystem and human and environmental health. Within the study’s scope, samples were taken from the wood parts of 16 woody species growing under similar conditions in Düzce province, which is among the five cities with the most polluted air in Europe. The wood part is the largest organ of higher plants in terms of mass; it traps heavy metals within itself for many years and can remove heavy metals to a great extent. Therefore, plants with a high potential for heavy metal accumulation in the wood part are among the most suitable plants for phytoremediation studies. The study determined Sr, Mo, and Sn concentrations in the wood parts of 16 tree species via inductively coupled plasma optical emission spectroscopy and compared them using statistical methods. Results indicate that Robinia pseudoacacia and Cedrus atlantica species were suitable for reducing pollution by Mo and Sn, while Platanus orientalis and Populus alba species were suitable for reducing Sr pollution.
DOI: 10.15376/biores.19.4.7842-7855
Keywords: Heavy metal; Molybdenum; Phytoremediation; Strontium; Tin
Contact information: Department of Forest Engineering, Faculty of Forestry, Kastamonu University, Kastamonu, 37210, Türkiye; *Corresponding author: nyigit@kastamonu.edu.tr
INTRODUCTION
It is frequently stated that many of today’s most important problems worldwide have emerged due to industrial and technological advancements in the last century. Global climate change, urbanization, and pollution, which are now defined as the most significant and irreversible problems on a global scale, have emerged because of this process. Specifically, the workforce required in the industrial field has caused the population to gather in certain areas, which has given rise to the problem of urbanization (Dogan et al. 2023; Erturk et al. 2024). Excessive use of fossil fuels to generate the energy needed to meet the needs of industry and people has led to an increase in various gases in the atmosphere, impaired atmospheric gas balance, and ultimately global climate change (Tekin et al. 2022; Özel et al. 2024). Mining activities to provide the raw materials required for industrial activities and the processing of products have led to a rapid increase in environmental pollution (Istanbullu et al. 2023; Kuzmina et al. 2023).
Among the above-mentioned problems, urbanization and global climate change are now considered irreversible (Gur et al. 2024). Pollution has become a global problem that threatens all living beings and ecosystems.
Air pollution, in particular, has reached such serious dimensions that it is stated that approximately 2.5 million living spaces across Europe are polluted, 90% of the world’s population breathes polluted air, and air pollution causes more than 4 million premature births and approximately 7 million deaths worldwide every year (Ghoma et al. 2023; Isinkaralar et al. 2023; WHO 2024). Among the air pollution components, those that pose the most serious threat to human and environmental health are heavy metals. It is indicated that heavy metals, some of which can be harmful, toxic, and fatal to humans even at low concentrations, can be harmful at high concentrations, albeit they are necessary as nutrients for living things (Ucun Ozel et al. 2019; Key et al. 2022). Recent studies reveal that the concentrations of heavy metals have increased significantly in soil (Rashid et al. 2023; Xiang et al. 2024), water (Uncuosmanoglu and Mutlu 2021; Mutlu 2021), and air (Guney et al. 2023) as a result of anthropogenic activities. Moreover, releasing heavy metals into nature causes pollution throughout the receiving environments. For example, heavy metals released into the air descend to the soil with the effect of gravity, and after a while, heavy metals in the air mix with rainwater into soil and water resources. Heavy metals in water and soil are exchanged between receiving environments (Adnan et al. 2024; Swain 2024). Thus, all living things and ecosystems in nature are affected by this pollution. Moreover, this situation is shown to be responsible for processes affecting all living things in the world, such as global climate change (Tekin et al. 2022; Canturk et al. 2024; Dogan et al. 2024). Some of the heavy metals can be extremely harmful and fatal for living organisms, even at very low concentrations (Key et al. 2022; Sevik et al. 2024).
Strontium (Sr) is one of the most toxic heavy metals for the environment and human health. Some compounds of Sr, which is harmful to human health even at low concentrations, can cause lung cancer and accumulate in the body throughout life, causing serious problems that may even result in sudden death (NIH 2024). Tin (Sn), one of the elements threatening human health, is a potential clastogen. When inhaled, it causes shortness of breath, coughing, and wheezing, may lead to dizziness, balance disorder, amnesia, and headache in the nervous system, and may cause vasodilation, hypotension, and heart failure. While it causes diarrhea, vomiting, muscle weakness and paralysis, anemia, and severe damage to the liver and kidneys in humans, fatal cases have been reported after its ingestion in large amounts (Sharma and Kumar, 2020). Molybdenum (Mo) is a micronutrient and an essential trace element that acts as a cofactor for more than 50 enzymes. However, it is stated that coal combustion wastes are very rich in Mo, and Mo toxicity poses a potential risk for humans due to the widespread use of Mo in ceramics, glass, contact lens solutions, metallurgy, lubricants, pigments, catalysts, electronics, and cosmetic products (Tambat et al. 2023). Moreover, it is stressed that the heavy metals in question can be much more harmful and fatal if taken into the body through inhalation (Jaishankar et al., 2014). Hence, reducing heavy metal pollution in the air is one of the priority research topics.
Many studies have determined that heavy metals accumulate at different levels in different plant organs (Aricak et al. 2019; Ghoma et al. 2022; Karacocuk et al. 2022; Guney et al. 2023; Öztürk Pulatoğlu 2024). It was generally determined that heavy metals accumulated most in the outer bark, roots, and leaves and least in the wood (Karacocuk et al. 2022; Erdem et al. 2023). This situation is primarily related to the entry route of heavy metals into the plant and their transportation within the plant. Heavy metals can enter the plant body directly from the soil through the roots, from the air through the leaves, or from the stem parts (Cobanoglu et al. 2023). Therefore, heavy metals in the air primarily contact the leaves or bark, and heavy metals in the soil contact the roots. On the other hand, the wood part does not have direct contact with soil or air and heavy metals must be transported and accumulated within the plant structure. Therefore, the wood is generally the organ with the lowest concentration of heavy metals (Şevik et al. 2024). This may be due to different ion exchange capacities of xylem in different tree species. The amount of metal ions adsorbed onto biomaterials is governed by the ion exchange capacity (IEC) (Hubbe et al. 2011). For one mole of metal (Sr or Cd) sorbed, there is one mole of Ca displaced (Crist et al. 2003). In other words, each adsorbed metal ion is predicted to displace a number of other ions, such as sodium or hydrogen, corresponding to the valence of the metal species (Hubbe 2013). Most cellulosic materials have the ability to bind with positively charged ions (Hubbe et al. 2022). The plant cell wall, which is a part of the apoplast, is a complex and multifunctional system. Due to the presence of ion-exchange groups, the plant cell wall controls the composition of periplasmic medium as well as transport of ions and metabolites across the plasma membrane. Primary plant cell walls are composed mostly of polysaccharides (cellulose, hemicelluloses, and pectins) which account for up to 90% plant cell wall dry weight (Meychik et al. 2017). In general, hardwoods contain more hemicellulose than softwoods (Baeza and Freer 2000). Softwoods are those woods that come from gymnosperms, and hardwoods are woods that come from angiosperms (Popescu et al. 2011). Therefore, different species have different levels of heavy metal accumulation capacity and this has been demonstrated in numerous studies (Karacocuk et al. 2021; Koc et al. 2024).
Species that can accumulate these heavy metals, particularly in the wood part, are the most suitable for this purpose because the wood part is the largest organ of higher plants in terms of mass; it traps heavy metals within itself for many years and can remove heavy metals from the air to a significant extent (Key et al. 2023). Heavy metals can accumulate more in organs such as leaves and bark than in wood. However, these organs dry up and fall off in a short time, and the heavy metals trapped in them are released back into nature as a result of decay. By contrast, the heavy metals accumulated in the trunk wood are kept away from nature as long as the trees live, which can be thousands of years for some species. In addition, after the trees are cut down, the heavy metals accumulated in the wood are kept away from nature for many years by using the wood in furniture, construction, etc. Therefore, species that can accumulate heavy metals in the wood are beneficial in phytoremediation studies (Ateya et al. 2023; Key et al. 2023).
However, the most suitable species that can be used for this purpose should be determined separately for each element. This study aimed to determine the potential of some tall trees grown frequently in urban areas to accumulate Sr, Sn, and Mo heavy metals in their wood parts.
Until now, many studies have been conducted to determine heavy metal concentrations both in different organs of trees (Koc et al. 2024) and in other parts of the wood of the same tree (Sevik et al. 2024). However, these studies do not provide sufficient information on using high-structure trees for phytoremediation. Because the most suitable organ for phytoremediation studies is the trunk wood and studies on trunk wood have generally been conducted on a single or a few species. The determination of heavy metal concentrations in the stem wood of as many species as possible growing in similar ecological conditions in the same area will provide much more helpful information to the field of application. In this respect, this study has a special importance in terms of the information it provides to the application.
EXPERIMENTAL
Materials and Methods
The present study used wood samples taken from the main trunks of woody species growing in Düzce city center. Düzce is one of the five cities with the most polluted air in Europe (Koc et al. 2024). The tree species subject to the study are frequently used in landscape surveys, especially in Türkiye and Europe. Table 1 lists the species used in the study. In the region where the study was conducted, the trees used in the study can thrive. The species to reduce heavy metal pollution should have two important features. The first is that the trees are not damaged by heavy metal pollution and continue their healthy growth. The trees used in the study were selected because of these characteristics. The other feature that should be present in the species to reduce heavy metal pollution is the ability to accumulate as much heavy metals as possible. These characteristics of the trees were also evaluated within the scope of the study.
Table 1. Tree Species Used in the Study
The materials used in the study were obtained during a harvest in the region, and the trees not foreseen to be cut were not harmed. The trees were felled entirely on the same day during this harvest. However, although this method provides the healthiest sample, it is not a sustainable method that can be used at all times. Therefore, in similar studies, taking samples from the trees with the help of a drill is recommended. However, samples must be taken from the main trunk because the main trunk is the largest part of the tree by volume, much larger than all other parts of the trunk combined, and the structure of the trunk wood and, therefore, the potential for heavy metal accumulation is different from that of the branch wood.
Trunk stump samples were taken from the main trunks of the trees subject to the study at a height of approximately 50 cm from the ground. Samples were taken from five points in three directions on the stumps. Samples taken in the form of sawdust were placed in glass Petri dishes and left to dry for 15 days, then dried in an oven at 45 °C for a week. A total of 0.5 g of the dried samples were then mixed with 6 mL of 65% HNO3 and 2 mL of 30% H2O2 were added and placed in a microwave oven. The samples that became a solution were taken into volumetric flasks and completed to 50 mL with ultrapure water, then analyzed with the Inductively Coupled Plasma Optical Emission spectroscopy (ICP-OES) device (Spectro, Kleve, Germany), and Sr, Mo, and Sn concentrations were calculated by multiplying the obtained values by the dilution factor. The method employed in the study has been frequently used in studies carried out on this subject in recent years (Çebi Kilicoglu 2024; Şevik et al. 2024).
Variance analysis was applied to the data obtained, and Duncan’s test was applied for the factors with statistically significant differences at least at a 95% confidence level (P < 0.05), and the obtained data were simplified, tabulated, and interpreted.
RESULTS
Variation in Sr (ppb) concentrations on a tree species basis are shown in Table 2.
Table 2. Variation in Sr (ppb) Concentrations on a Tree Species Basis
As can be seen from the tabulated values, the Sr concentration remained below the detectable limits in Robinia pseudoacacia, Pinus pinaster, Cupressus sempervirens, Picea orientalis, and Cedrus atlantica woods. When other species are evaluated, it is apparent that Sr concentration ranged between 3420 ppb and 33600 ppb on a species basis. In all species, the lowest value was obtained in Pinus nigra wood, whereas the highest value was obtained in Platanus orientalis wood. The next highest values were obtained in Populus alba wood with 14700 ppb and Prunus avium wood with 10100 ppb. From the results, it is noteworthy that the lowest Sr concentrations were obtained in coniferous species. Furthermore, the species in which Sr level remains below detectable limits were coniferous or scale-leaved species, except for Robinia pseudoacacia. Table 3 shows the variation in Mo concentrations on a species basis.
As can be seen from the values in the table, Mo concentration in Picea orientalis wood remained below the detectable limits. In other species, the lowest values were obtained in Fraxinus excelsior with 106 ppb and Tilia tomentosa with 278 ppb. The highest values were acquired in Robinia pseudoacacia wood with 14100 ppb and Cedrus atlantica wood with 6490 ppb. The Mo concentration determined in the wood of species other than these species was in a very narrow range (2130 ppb to 4650 ppb). Table 4 presents the variation in Sn concentrations on a species basis.
Table 3. Variation in Mo (ppb) Concentrations Based on Tree Species
Table 4. Variation in Sn (ppb) Concentrations Based on Tree Species
Sn concentration accumulated within detectable limits in all species subject to study. The lowest average values were obtained in Fraxinus excelsior (140 ppb), Tilia tomentosa (430 ppb), and Pinus pinaster (1700 ppb) wood, whereas the highest values were acquired in Robinia pseudoacacia (16000 ppb), Cedrus atlantica (7330 ppb), and Pseudotsuga menziesii (4230 ppb) wood. There was a difference of approximately 115 times between the lowest and highest values.
CONCLUSION AND DISCUSSION
This study determined that all three heavy metals examined varied at a statistically significant level on a tree species basis. This is an expected result because numerous studies conducted to date have revealed that heavy metal accumulation potential can vary significantly based on tree species (Cobanoglu et al. 2023; Sulhan et al. 2023).
As a result of the analyses, the highest Sr concentration was obtained in Platanus orientalis wood with 33600 ppb and Populus alba wood with 14700 ppb. These values are quite high compared to studies conducted to date. Erdem (2023) determined Sr concentration in different species and found that the average Sr concentration in wood was 1880 ppb in Pinus pinaster, 3210 ppb in Cupressus arizonica, 5320 ppb in Picea orientalis, 2340 ppb in Cedrus atlantica, and 1200 ppb in Pseudotsuga menziesii. Karacocuk (2021) found that Sr concentrations in the woods of plants collected from areas with heavy traffic were 10900 ppb in Robinia pseudoacacia, 47100 ppb in Platanus orientalis, 14900 ppb in Acer negundo, 7480 ppb in Ulmus minor, and 18800 ppb in Nerium oleander. The present study also demonstrates that Platanus orientalis is a good phytoremediation plant for Sr.
The highest Mo concentrations in this study were obtained in Robinia pseudoacacia wood with 14100 ppb and Cedrus atlantica wood with 6490 ppb. Molybdenum is one of the least studied heavy metals. Hence, no literature information could be found to compare the study results.
Tin is one of the most harmful elements to human and environmental health. Within the study’s scope, the highest Sn concentrations were obtained in the wood of Robinia pseudoacacia (16000 ppb), Cedrus atlantica (7330 ppb), and Pseudotsuga menziesii (4230 ppb). Cetin et al. (2023) found that the average Sn concentration in wood was 1410 ppb in Pinus pinaster, 2110 ppb in Cupressus arizonica, 1530 ppb in Picea orientalis, 1880 ppb in Cedrus atlantica, and 2070 ppb in Pseudotsuga menziesii. The Sn concentrations obtained in this study are considerably higher.
The most harmful and dangerous element evaluated in this study is Sr, and it is an element on ATSDR’s substance priority list due to its potential harms (Savas et al. 2021). The highest Sr concentrations were found in broad-leaved species, while Sr concentrations in coniferous species were quite low. Furthermore, Sr concentrations remained below detectable limits in the wood of Pinus pinaster, Cupressus sempervirens, Picea orientalis and Cedrus atlantica, which are coniferous or scale-leaved species. The amount of metal ions adsorbed onto biomaterials is governed by the ion exchange capacity (Hubbe et al. 2011). Softwoods are those woods that come from gymnosperms (Popescu et al. 2011). Softwoods generally contain less hemicellulose than softwoods (Baeza and Freer 2000). In this case, the potential for Sr accumulation in the wood of species may be related to the IEC and hence the amount of hemicellulose.
The highest Mo and Sn concentrations were obtained in Robinia pseudoacacia and Cedrus atlantica wood. These results demonstrate that plants have different levels of heavy metal accumulation potential. This situation has been frequently emphasized in studies conducted to date, and it has been stressed that the appropriate species should be determined separately on a heavy metal basis to monitor variation in the pollution of each heavy metal and reduce its content (Yayla et al. 2022).
As a result of the study, it was determined that heavy metal accumulation was quite high, especially in species such as Robinia pseudoacacia, Cedrus atlantica, and Platanus orientalis. This situation is primarily related to the anatomical and morphological structure of species. Especially the leaf and bark structure is one of the most important factors in the entry of heavy metals into the air into the plant body. Heavy metals can enter the plant body from the soil via roots, from the air via leaves, and by direct adsorption from the stem sections (Wani et al. 2018; Chen et al. 2021). Heavy metals in the air enter the leaves through stomata or adhere to stem sections such as leaves and bark through particulate matter. Studies show that heavy metals in the air adhere to particulate matter and infect particulate matter with heavy metals. Particulate matter containing heavy metals can adhere to plant organs and enter the plant body through stem parts. The fact that the leaves are large, hairy, and dense and the bark is rough causes a large amount of particulate matter to adhere to these organs and infect the organs with heavy metals (Cesur et al. 2022). Here the word “dense” has the meaning used in forestry to denote dense packing and the ability to block air movement. As a result of the study, it was determined that the highest heavy metals were found in trees with these characteristics.
Within the scope of the study, the aim was to determine suitable species to reduce heavy metal pollution in the air. Heavy metals can enter the plant body from air, soil or water through roots. The area where the study was conducted is an area that can be considered quite homogeneous in terms of soil and, therefore, water. In addition, Sr, Mo and Sn concentrations were below the detectable limits as a result of heavy metal analysis in soils. This result can be interpreted as the trees effectively draw water into their root systems, which reduces the metal content of the soil. This combination may explain the low ion levels in the soil. This indicates that the accumulation of Sr, Mo, and Sn in plants is airborne. In addition, studies conducted in the region showed that there were large differences between the concentrations of heavy metals such as Cr (Koc et al. 2024), Pd (Sevik et al. 2024), Sn (Cetin et al. 2023), and Tl (Canturk et al. 2023) in wood annual rings formed in different periods. It was stated that these differences were due to the change in heavy metal pollution in the air during the process.
The transport of elements within the wood part is largely related to the cell structure and especially the cell wall (apoplastic pathway) (Wani et al. 2018). The wood part is the plant’s organ that lacks direct contact with the air, and therefore, heavy metal accumulation in wood is considerably lower than in other organs (Koç et al. 2024). This can be attributed to different ion exchange capacities of different tissues in the tree. The amount of ion-exchange groups in the cell wall differs not only between plant species but also between tissues within the same plant (Meychik et al. 2021). However, in regions where annual rings are formed, wood is the most suitable biomonitoring for checking the change in heavy metal pollution from past to present (Cesur et al. 2022). Furthermore, because it is the largest organ of plants in terms of mass, trees species that can accumulate heavy metals in the wood part are very suitable for phytoremediation (Koc et al. 2024; Şevik et al. 2024). Nevertheless, plants that can be used for phytoremediation purposes must be able to accumulate heavy metals in the wood part; in other words, heavy metals must be able to enter the wood part.
In this study, the highest values were obtained for Sr (33600 ppb) in Platanus orientalis wood, Mo (14100 ppb), and Sn (16000 ppb) in Robinia pseudoacacia wood. These values are quite high compared to the values obtained in similar studies. Erdem (2023) obtained the highest average Sr concentrations in Picea orientalis with 5320 ppb in his research on 5 different species. Cetin et al. (2023) reported that the average Sn concentration in the wood of five different species varied between 1410 ppb and 2110 ppb, and the highest concentrations were obtained in Cupressus arizonica. However, the values obtained in some species evaluated in this study are much higher than the values obtained in other studies. In addition, heavy metal concentrations in some species in this study were below the determinable limits. This situation reveals the importance of evaluating many species in similar studies.
The potential of plants to absorb and accumulate heavy metals depends on numerous factors, such as organ structure, weather conditions, and plant habitus, in addition to the heavy metal’s structure and its interaction with the plant (Savas et al. 2021). These factors are also linked to other factors. For example, plant physiology is shaped under the influence of genetic structure (Yigit et al. 2021; Hrivnak et al. 2024) and environmental conditions (Yigit et al. 2023; Özdikmenli et al. 2024). Hence, all factors impacting plant physiology also influence the entry of heavy metals into the plant and their accumulation, and plant physiology is shaped by the interaction of many inter-influencing factors, such as genetic structure (Kurz et al. 2024), edaphic (Kravkaz Kuscu et al. 2018), and climatic factors (Varol et al. 2022; Aricak et al. 2024), and stress factors (Ozel et al. 2021; Koc and Nzouko 2022). Therefore, many of these factors directly and indirectly impact the heavy metal accumulation potential of plants. However, information about this complex mechanism is still limited (Isinkaralar et al. 2022).
RECOMMENDATIONS
This study has determined that Robinia pseudoacacia and Cedrus atlantica were suitable for reducing Mo and Sn pollutions, and Platanus orientalis and Populus alba were suitable for reducing Sr pollution. Among these species, Platanus orientalis and Cedrus atlantica are particularly suitable for use because they can be grown in a wide area, grow very quickly, branch and reach large masses, are very long-lived, and can preserve heavy metals for hundreds or even thousands of years. Robinia pseudoacacia, on the other hand, is a species known for its durability and can be used in areas where there is Mo and Sn pollutions and where edaphic and climatic conditions are not very favorable, particularly in drought.
The heavy metals analyzed in the study are extremely harmful and dangerous for human and environmental health, and therefore, reducing heavy metal pollution is very important. However, this study found that suitable tree species should be determined separately to reduce the pollution levels of each heavy metal. In contrast, the number of studies on reducing Sn and Mo pollutions is negligibly low, and the number of studies on reducing Sr pollution is inadequate. It is recommended that comprehensive studies be conducted on the subject.
REFERENCES CITED
Adnan, M., Xiao, B., Ali, M. U., Xiao, P., Zhao, P., Wang, H., and Bibi, S. (2024). “Heavy metals pollution from smelting activities: A threat to soil and groundwater,” Ecotoxicology and Environmental Safety 274, article 116189. DOI: 10.1016/j.ecoenv.2024.116189
Aricak, B., Çetin, M., Erdem, R., Sevik, H., and Cometen, H. (2019). “The change of some heavy metal concentrations in Scotch pine (Pinus sylvestris) depending on traffic density, organelle and washing,” Applied Ecology & Environmental Research 17(3), 6723-6734 DOI: 10.15666/aeer/1703_67236734
Arıcak, B., Canturk, U., Koc, I., Erdem, R., and Sevik, H. (2024). “Shifts that may appear in climate classifications in Bursa due to global climate change,” Forestist 74, 129-137. DOI: 10.5152/ forestist.2024.23074
Ateya, T. A. A., Bayraktar, O. Y., and Koc, I. (2023). “Do Picea pungens Engelm. organs be a suitable biomonitor of urban atmosphere pollution?,” Cerne 29, article e-103228.
Baeza, J., and Freer, J. (2000). “Chemical characterization of wood and its components,” Wood and Cellulosic Chemistry, Marcel Dekker Inc. New York, USA
Canturk, U., Koç, İ., Özel, H. B., and Şevik, H. (2024). “Possible changes of Pinus nigra distribution regions in Türkiye with the impacts of global climate change,” BioResources 19(3), 6190-6214. DOI: 10.15376/biores.19.3.6190-6214
Çebi Kılıçoğlu, M. (2024). “Effects of heavy metal contamination on fungal diversity in Pinus brutia shoots,” BioResources 19(2), 2724-2735. DOI: 10.15376/biores.19.2.2724-2735
Cesur, A., Zeren Cetin, I., Cetin, M., Sevik, H., and Ozel, H. B. (2022). “The use of Cupressus arizonica as a biomonitor of Li, Fe, and Cr pollution in Kastamonu,” Water Air Soil Pollution 233, article 193. DOI: 10.1007/s11270-022-05667-w
Cetin, M., Cebi Kilicoglu, M., and Kocan, N. (2023). “Usability of biomonitors in monitoring the change of tin concentration in the air,” Environmental Science and Pollution Research 30(52), 112357-112367. DOI: 10.1007/s11356-023-30277-2
Chen, S., Yao, Q., Chen, X., Liu, J., Chen, D., Ou, T., Liu, J., Dong, Z., Zheng, Z., and Fang, K. (2021). “Tree-ring recorded variations of 10 heavy metal elements over the past 168 years in southeastern China,” Elementa: Science of the Anthropocene 9(1), article 00075. DOI: 10.1525/elementa.2020.20.00075
Cobanoglu, H., Sevik, H., and Koç, İ. (2023). “Do annual rings really reveal Cd, Ni, and Zn pollution in the air related to traffic density? An example of the cedar tree,” Water, Air, and Soil Pollution 234(2), article 65. DOI: 10.1007/s11270-023-06086-1
Crist, D. R., Crist, R. H., and Martin, J. R. (2003). “A new process for toxic metal uptake by a kraft lignin,” J. Chem. Technol. Biotech. 78(2-3), 199-202. DOI: 10.1002/jctb.735
Dogan, S., Kilicoglu, C., Akinci, H., Sevik, H., and Cetin, M. (2023). “Determining the suitable settlement areas in Alanya with GIS-based site selection analyses,” Environmental Science and Pollution Research 30(11), 29180-29189. DOI: 10.1590/01047760202329013282
Dogan, S., Kilicoglu, C., Akinci, H., Sevik, H., Cetin, M., and Kocan, N. (2024). “Comprehensive risk assessment for identifying suitable residential zones in Manavgat, Mediterranean Region,” Evaluation and Program Planning 106, article 102465. DOI: 10.1016/j.evalprogplan.2024.102465
Erdem, R. (2023). “Changes in strontium levels in bark and over the past 40 years in the wood of trees exposed to high levels of air pollution,” BioResources 18(4), 8020-8036. DOI: 10.15376/biores.18.4.8020-8036
Erdem, R., Aricak, B., Cetin, M., and Sevik, H. (2023). “Change in some heavy metal concentrations in forest trees by species, organ, and soil depth,” Forestist, 73(3), 257-263. DOI: 10.5152/forestist.2023.22069
Erturk, N., Aricak, B., Sevik, H., and Yigit, N. (2024). “Possible change in distribution areas of Abies in Kastamonu due to global climate change,” Kastamonu University Journal of Forestry Faculty 24(1), 81-91. DOI: 10.17475/kastorman.1460616
Ghoma, W. E. O., Sevik, H., and Isinkaralar, K. (2023). “Comparison of the rate of certain trace metals accumulation in indoor plants for smoking and non-smoking areas,” Environmental Science and Pollution Research 30(30), 75768-75776. DOI: 10.1007/s11356-023-27790-9
Ghoma, W., Sevik, H., and Isinkaralar, K. (2022). “Using indoor plants as biomonitors for detection of toxic metals by tobacco smoke,” Air Quality, Atmosphere and Health 15, 415-424 DOI: 10.1007/s11869-021-01146-z
Guney, D., Koc, I., Isinkaralar, K., and Erdem, R. (2023). “Variation in Pb and Zn concentrations in different species of trees and shrubs and their organs depending on traffic density,” Baltic Forestry, 29(2), id661-id661. DOI: 10.46490/BF661
Gur, E., Palta, S., Ozel, H. B., Varol, T., Sevik, H., Cetin, M., and Kocan, N. (2024). “Assessment of climate change impact on highland areas in Kastamonu, Turkey,” Anthropocene 46, article 100432. DOI: 10.1016/j.ancene.2024.100432
Hrivnák, M., Krajmerová, D., Paule, L., Zhelev, P., Sevik, H., Ivanković, M., Goginashvili, N., Paule, J., and Gömöry, D. (2024). “Are there hybrid zones in Fagus sylvatica L. sensu lato?,” European Journal of Forest Research 143, 451-464. DOI: 10.1007/s10342-023-01634-0
Hubbe, M. A. (2013). “New horizons for use of cellulose-based materials to adsorb pollutants from aqueous solutions,” Lignocellulose 2(2), 386-411.
Hubbe, M. A., Hasan, S. H., and Ducoste, J. J. (2011). “Cellulosic substrates for removal of pollutants from aqueous systems: A review. 1. Metals,” BioResources 6(2), 2161-2287.
Hubbe, M. A., Szlek, D. B., and Vera, R. E. (2022). “Detergency mechanisms and cellulosic surfaces: A review,” BioResources, 17(4). 7167-7249. DOI: 10.15376/biores.17.4.Hubbe
Isinkaralar, K., Isinkaralar, O., Koç, İ., Özel, H. B., and Şevik, H. (2023). “Assessing the possibility of airborne bismuth accumulation and spatial distribution in an urban area by tree bark: A case study in Düzce, Türkiye,” Biomass Conversion and Biorefinery Online, 1-12. DOI: 10.1007/s13399-023-04399-z
Isinkaralar, K., Koc, I., Erdem, R., and Sevik, H. (2022) “Atmospheric Cd, Cr, and Zn deposition in several landscape plants in Mersin, Türkiye,” Water, Air, & Soil Pollution 233, article 120. DOI: 10.1007/s11270-022-05607-8
Istanbullu, S. N., Sevik, H., Isinkaralar, K., and Isinkaralar, O. (2023). “Spatial distribution of heavy metal contamination in road dust samples from an urban environment in Samsun, Türkiye,” Bulletin of Environmental Contamination and Toxicology 110(4), article 78. DOI: 10.1007/s00128-023-03720-w
Jaishankar, M., Tseten, T., Anbalagan, N., Mathew, B. B., and Beeregowda, K. N. (2014). “Toxicity, mechanism and health effects of some heavy metals,” Interdisciplinary Toxicology 7(2), 60-72. DOI: 10.2478/intox-2014-0009
Karaçocuk, T. (2021). Changes in Heavy Metal Concentrations Depending on Traffic Density in Some Plants Grown in Samsun City Center, Master’s Thesis, University of Kastamonu University, Kastamonu, Türkiye.
Karacocuk, T., Sevik, H., Isinkaralar, K. Turkyilmaz, A., and Cetin, M. (2022). “The change of Cr and Mn concentrations in selected plants in Samsun city center depending on traffic density,” Landscape and Ecological Engineering 18, 75-83. DOI: 10.1007/s11355-021-00483-6
Key, K., Kulaç, Ş., Koç, İ., and Sevik, H. (2022). “Determining the 180-year change of Cd, Fe, and Al concentrations in the air by using annual rings of Corylus colurna L.,” Water, Air, & Soil Pollution 233(7), article 244. DOI: 10.1007/s11270-022-05741-3
Key, K., Kulaç, Ş., Koç, İ., and Sevik, H. (2023). “Proof of concept to characterize historical heavy-metal concentrations in atmosphere in North Turkey: Determining the variations of Ni, Co, and Mn concentrations in 180-year-old Corylus colurna L. (Turkish hazelnut) annual rings,” Acta Physiologiae Plantarum 45(10), article 120. DOI: 10.1007/s11738-023-03608-6
Koc, I., and Nzokou, P. (2022). “Do various conifers respond differently to water stress? A comparative study of white pine, concolor and balsam fir,” Kastamonu University Journal of Forestry Faculty 22(1), 1-16. DOI: 10.17475/kastorman.1095703
Koç, İ., Canturk, U., Isinkaralar, K., Ozel, H. B., and Sevik, H. (2024). “Assessment of metals (Ni, Ba) deposition in plant types and their organs at Mersin City, Türkiye,” Environmental Monitoring and Assessment 196(3), Article Number 282. DOI: 10.1007/s10661-024-12448-x
Koc, I., Cobanoglu, H., Canturk, U., Key, K., Kulac, S., and Sevik, H. (2024). “Change of Cr concentration from past to present in areas with elevated air pollution,” International Journal of Environmental Science and Technology 21(2), 2059-2070. DOI: 10.1007/s13762-023-05239-3
Kravkaz Kuscu, I. S., Cetin, M., Yigit, N., Savaci, G., and Sevik, H. (2018). “Relationship between enzyme activity (urease-catalase) and nutrient element in soil use,” Polish Journal of Environmental Studies 27(5), 2107-2112. DOI: 10.15244/pjoes/78475
Kurz, M., Koelz, A., Gorges, J., Carmona, B. P., Brang, P., Vitasse, Y., Kohler, M., Rezzonico, F., Smits, T. H., Bauhus, J., et al. (2023). “Tracing the origin of Oriental beech stands across Western Europe and reporting hybridization with European beech–Implications for assisted gene flow,” Forest Ecology and Management 531, article ID 120801. DOI: 10.1016/j.foreco.2023.120801
Kuzmina, N., Menshchikov, S., Mohnachev, P., Zavyalov, K., Petrova, I., Ozel, H. B., Aricak, B., Onat, S. M., and Sevik, H. (2023). “Change of aluminum concentrations in specific plants by species, organ, washing, and traffic density,” BioResources 18(1), 792-803. DOI: 10.15376/biores.18.1.792-803
Meychik, N., Nikolaeva, Y., and Kushunina, M. (2021). “The significance of ion-exchange properties of plant root cell walls for nutrient and water uptake by plants,” Plant Physiology and Biochemistry 166, 140-147. DOI: 10.1016/j.plaphy.2021.05.048
Meychik, N., Nikolaeva, Y., Kushunina, M., Titova, M., and Nosov, A. (2017). “Ion-exchange properties of the cell walls isolated from suspension-cultured plant cells,” Plant Cell, Tissue and Organ Culture (PCTOC) 129, 493-500. DOI: 10.1007/s11240-017-1194-7
Mutlu, E. (2021). “Determination of seasonal variations of heavy metals and physicochemical parameters in Kildir pond (Yildizeli-Sivas),” Fresenius Environmental Bulletin 30(6), 5773-5780
NIH (2024), “Toxicological Profile for Strontium” (https://www.ncbi.nlm.nih.gov/books/NBK602022/) Accessed 28 July 2024.
Özdikmenli, G., Yiğit, N., Özel, H. B., and Şevik, H. (2024). “Altitude-dependent variations in some morphological and anatomical features of Anatolian chestnut,” BioResources 19(3), 4635-4651. DOI: 10.15376/biores.19.3.4635-4651
Ozel, H. B., Abo Aisha, A. E. S., Cetin, M., Sevik, H., and Zeren Cetin, I. (2021). “The effects of increased exposure time to UV-B radiation on germination and seedling development of Anatolian black pine seeds,” Environmental Monitoring and Assessment 193(7), 388-395. DOI: 10.1007/s10661-021-09178-9
Özel, H. B., Şevik, H., Yıldız, Y., and Çobanoğlu, H. (2024). “Effects of silver nanoparticles on germination and seedling characteristics of Oriental beech (Fagus orientalis) seeds,” BioResources 19(2), 2135-2148. DOI: 10.15376/biores.19.2.2135-2148
Öztürk Pulatoğlu, A. (2024). “Variation of Ba concentration in some plants grown in industrial zone in Türkiye,” Forest Science and Technology 20(1), 38-46. DOI: 10.1080/21580103.2023.2290500
Popescu, M. C., Popescu, C. M., Lisa, G., and Sakata, Y. (2011). “Evaluation of morphological and chemical aspects of different wood species by spectroscopy and thermal methods,” Journal of Molecular Structure 988(1-3), 65-72. DOI: 10.1016/j.molstruc.2010.12.004
Rashid, A., Schutte, B. J., Ulery, A., Deyholos, M. K., Sanogo, S., Lehnhoff, E. A., and Beck, L. (2023). “Heavy metal contamination in agricultural soil: environmental pollutants affecting crop health,” Agronomy 13, article 1521. DOI: 10.3390/ agronomy13061521
Savas, D. S., Sevik, H., Isinkaralar, K., Turkyilmaz, A., and Cetin, M. (2021). “The potential of using Cedrus atlantica as a biomonitor in the concentrations of Cr and Mn,” Environmental Science and Pollution Research 28, 55446-55453. DOI: 10.1007/s11356-021-14826-1
Sevik, H., Koç, İ., and Cobanoglu, H. (2024). “Determination of some exotic landscape species as biomonitors that can be used for monitoring and reducing Pd pollution in the air,” Water Air Soil Pollut. 235, article 615. DOI: 10.1007/s11270-024-07429-2
Sharma, M., and Kumar, P. (2020). “Biochemical alteration of mustard grown under tin contaminated soil,” Plant Archives 20(2), 3487-3492.
Şevik, H., Yildiz, Y., and Özel, H. B. (2024). “Phytoremediation and long-term metal uptake monitoring of silver, selenium, antimony, and thallium by black pine (Pinus nigra Arnold). BioResources 19(3), 4824-4837. DOI: 10.15376/biores.19.3.4824-4837
Sulhan, O. F., Sevik, H., and Isinkaralar, K. (2023). “Assessment of Cr and Zn deposition on Picea pungens Engelm. in urban air of Ankara, Türkiye,” Environment, Development and Sustainability 25, 4365-4384. DOI: 10.1007/s10668-022-02647
Swain, C. K. (2024). “Environmental pollution indices: a review on concentration of heavy metals in air, water, and soil near industrialization and urbanization,” Discover Environment 2(1), 5. DOI: 10.1007/s44274-024-00030-8
Tambat, V. S., Tseng, Y. S., Kumar, P., Chen, C. W., Singhania, R. R., Chang, J. S., and Patel, A. K. (2023). “Effective and sustainable bioremediation of molybdenum pollutants from wastewaters by potential microalgae,” Environmental Technology and Innovation 30, article ID 103091. DOI: 10.1016/j.eti.2023.103091
Tekin, O., Cetin, M., Varol, T., Ozel, H. B., Sevik, H., and Zeren Cetin, I. (2022). “Altitudinal migration of species of fir (Abies spp.) in adaptation to climate change,” Water, Air, & Soil Pollution 233(9), article 385. DOI: 10.1007/s11270-022-05851-y
Ucun Ozel, H., Ozel, H. B., Cetin, M., Sevik, H., Gemici, B. T., and Varol, T. (2019). “Base alteration of some heavy metal concentrations on local and seasonal in Bartin River,” Environmental Monitoring and Assessment 191(9), article 154. DOI: 10.1007/s10661-019-7753-0
Uncumusaoğlu, A. A., and Mutlu, E. (2021). “Water quality assessment in Karaboğaz Stream Basin (Turkey) from a multi-statistical perspective,” Polish Journal of Environmental Studies 30(5), 4747-4759.
Varol, T., Canturk, U., Cetin, M., Ozel, H. B., Sevik, H., and Zeren Cetin, I. (2022). “Identifying the suitable habitats for Anatolian boxwood (Buxus sempervirens L.) for the future regarding climate change,” Theoretical and Applied Climatology 150(1-2), 637-647. DOI: 10.1007/s00704-022-04179-1
Wani, W., Masoodi, K. Z., Zaid, A., Wani, S. H., Shah, F., Meena, V. S., Shafiq, A.W. and Mosa, K. A. (2018). “Engineering plants for heavy metal stress tolerance,” Rendiconti Lincei. Scienze Fisiche e Naturali 29(3), 709-723.DOI: 10.1007/s12210-018-0702-y
Wani, W., Masoodi, K. Z., Zaid, A., Wani, S. H., Shah, F., Meena, V. S., Wani, S.A., and Mosa, K. A. (2018). “Engineering plants for heavy metal stress tolerance,” Rendiconti Lincei. Scienze Fisiche e Naturali 29, 709-723. DOI: 10.1007/s12210-018-0702-y
WHO (2024). “WHO releases country estimates on air pollution exposure and health impact,” (https://www.who.int/news/item/27-09-2016-who-releases-country-estimates-on-air-pollution-exposure-and-health-impact), Accessed 28 July 2024.
Xiang, Z., Wu, S., Zhu, L., Yang, K., and Lin, D. (2024). “Pollution characteristics and source apportionment of heavy metal (loid) s in soil and groundwater of a retired industrial park,” Journal of Environmental Sciences, 143, 23-34.DOI: 10.1016/j.jes.2023.07.015
Yayla, E. E., Sevik, H., and Isinkaralar, K. (2022). “Detection of landscape species as a low-cost biomonitoring study: Cr, Mn, and Zn pollution in urban air quality,” Environmental Monitoring and Assessment 194(10), article 687. DOI: 10.1007/s10661-022-10356-6
Yigit, N., Mutevelli, Z., Sevik, H., Onat, S. M., Ozel, H. B., Cetin, M., and Olgun, Ç. (2021). “Identification of some fiber characteristics in Rosa sp. and Nerium oleander L. wood grown under different ecological conditions,” BioResources 16(3), 5862-5874. DOI: 10.15376/biores.16.3.5862-5874
Yigit, N., Öztürk, A., Sevik, H., Özel, H. B., Ramadan Kshkush, F. E., and Işık, B. (2023). “Clonal variation based on some morphological and micromorphological characteristics in the boyabat (Sinop/Turkey) black pine (Pinus nigra subsp. pallasiana (Lamb.) Holmboe) seed orchard,” BioResources 18(3), 4850-4865. DOI: 10.15376/biores.18.3.4850-4865
Article submitted: June 8, 2024; Peer review completed: July 13, 2024; Revised version received: August 17, 2024; Accepted: August 18, 2024; Published: August 31, 2024.
DOI: 10.15376/biores.19.4.7842-7855