Research Articles

This study determined the factors affecting peeling strength performance of edge bands, an important element of the furniture industry, and improved peeling strength performance by optimizing these factors. The independent variables were material types, amount of adhesive, feed speed, and temperature, while the dependent variable was the peeling strength. A central composite design (CCD) was used to investigate the optimal process parameters to achieve a maximum peeling strength for medium-density fiberboard (MDF) and particle board (PB). These materials were prepared using different feed speeds, temperatures, and amounts of adhesive. The CCD design based on the desirability function approach successfully achieved the optimal process parameters. An analysis of variance (ANOVA) determined the significant parameters on the peeling strength of edge banding. Maximum MDF and PB edge banding peeling strength values were calculated as 0.0706 and 0.0673 N/mm², respectively. In the edge banding process applied using optimum parameter levels, an increase of 8.8% and 7.17% was achieved in the peeling strength of PB and MDF samples, respectively.

Despite their environmental benefits and technical viability, mass timber structures adoption remains limited. As an alternative to steel and concrete in non-residential and multi-storey construction, they represent only 10.2% of buildings four or fewer storeys high, 1% of those five or six storeys high and 4% of those seven to twelve storeys high in Quebec. Based on a purposive sample of 42 interviews with various construction industry professionals in Quebec (Canada), the representation of mass timber construction was highlighted. A thematic analysis approach enabled a study of the motivations and barriers to adopting mass timber and the specific reasons behind them, and to determine whether respondents’ perceptions differ significantly depending on their main professional activity. The results corroborate existing literature while offering deeper insights into motivations and barriers, revealing new viewpoints. Respondents cited construction costs, expertise, manufacturing capacity, regulatory limits, and material specifications as the most critical barriers, while environmental impact and aesthetics of wood as key motivators. The response profile analysis suggests that private developers and general contractors should be the primary targets of measures promoting mass timber adoption. This research will aid in refining policies and strategies to encourage the widespread adoption of mass timber in construction practices.

The performance of five known ginger cultivars of eastern India, namely Gorubathan, Suruchi, Suprabha, Bhaisay and a Local collection, were studied in an eight-year-old 2.7 m × 2.7 m spaced arecanut plantation at Uttar Banga Krishi Vishwavidyalaya within the Teraiagro-ecological region of West Bengal. Plantlets of ginger were raised through single bud sprout techniques (SBT) using 5 g cut piece of rhizome with a plump bud and transplanted under an arecanut-based high density crop model along with bay leaf and citrus as component crops. Different ginger cultivars showed considerable variations with respect to their growth behavior and yield. The Local cultivar produced vigorous growth with a higher average number of tillers (5.83) per plant with maximum height (57.6 cm). However, the cultivar Suprabha proved its superiority over other cultivars with respect to rhizome yield, producing 2.45 tons from one hectare of crop model, with 11% net cropped area of ginger and possessing a higher benefit cost ratio (6.51).

The effect of the cell size of honeycomb paperboard core was studied relative to the grammage (basis weight) and two key strength properties of cellular paperboard: bending stiffness (BS) and flat crush resistance (FCT). The subject of the study was honeycomb paperboard of a different structure, in which single-layer kraftliner paper was used for the flat layers, with a grammage and thickness lower than the paper used for the paperboard core. Five paperboards made of the same fibrous materials of the same thickness and different core cell diameter D were tested, equal to 10, 12, 14, 17, and 22 mm, respectively. The research showed a close dependence of the grammage of the paperboard, BS, and the FCT of the honeycomb paperboard on the core cell size. With the increase of the core cell size, the above-mentioned physical properties showed a decreasing trend. For the honeycomb paperboards tested, a linear relationship was obtained between the grammage, BS, FCT of the honeycomb board and the diameter D of the hexagonal core cell.

Mechanical properties were evaluated for bio-natural fiber-reinforced epoxy hybrid composites made with varying amounts of jute, banana stem leaves (BSL), and tamarind shell powder (TSP). Each composite design had varying weight percentages of jute and BSL (5 to 25%) and a consistent mix of TSP (10%) and epoxy resin (60%). The tensile strength, flexural strength, interlaminar shear strength (ILSS), impact strength, hardness, and water absorption were examined. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were used to investigate chemical bonding and morphology. The findings indicated a relationship between fiber and filler content and mechanical properties of composites, with 20% jute fiber content resulting in the highest performance. The tensile strength of the composite increased by 24.6%, rising from 32.4 MPa for the 5% jute and 25% banana stem leaves (5J25BSL) composite to 40.4 MPa for the 20% jute and 10% banana stem leaves (20J10BSL) composite. Similarly, the flexural strength saw a 27.9% improvement, increasing from 67.2 MPa in the 5J25BSL composite to 86.0 MPa in the 20J10BSL composite. The impact strength also experienced a notable increase of 39.1%, moving from 2.56 J for the 5J25BSL composite to 3.56 J for the 20J10BSL composite. These results highlight significant improvements in all three properties, as the proportion of jute in the composite increased and the proportion of banana stem leaves decreased. This research influences material selection for engineering applications and informs the development of specialized composite materials.