Review Articles
Latest articles
- Reviewpp 7951-8001Vishtal, A., and Retulainen, E. (2014). "Boosting the extensibility potential of fibre networks: A review," BioRes. 9(4), 7951-8001.AbstractArticlePDF
Production of paper-based packaging is growing at the present moment and has great future prospects. However, the development of new packaging concepts is creating a demand for an improvement in the mechanical properties of paper. Extensibility is one of these properties. Highly extensible papers have the potential to replace certain kinds of plastics used in packaging. Extensibility is also important for the sack and bag paper grades and for runnability in any converting process. This paper reviews the factors that affect the extensibility of fibres and paper, and discusses opportunities for improving the straining potential of paper and paper-like fibre networks. It is possible to classify factors that affect extensibility into three main categories: fibre structure, interfibre bonding, and structure of the fibre network. Extensibility is also affected by the straining situation and the phase state of the polymers in the cell wall. By understanding the basic phenomena related to the elongation, and by combining different methods affecting the deformability of fibre network, extensibility of paper can be raised to a higher level.
- Reviewpp 1879-1914Ioelovich, M. (2015). "Recent findings and the energetic potential of plant biomass as a renewable source of biofuels - A review," BioRes. 10(1), 1879-1914.AbstractArticlePDF
Nowadays the main sources of energy are petroleum, coal, and natural gas. However, these fossil sources are not reproduced in nature; on a human timescale their reserves are exhausted permanently and run down. Considerable attention in recent years has been given to plant biomass, which in contrast to the fossil sources is continuously renewed in nature. In this critical review the use of non-edible plant biomass for production of various kinds of biofuels is considered. To generate energy, plant biomass either can be burned directly or it can be used after its conversion into carbonized solid fuel (e.g. biochar), liquid fuels (bioethanol, biodiesel, bio-oil), or gases (biogas). Among various biofuels, production of bioethanol has potential to be the most attractive if recent technological advances become implemented, such that the co-production of ethanol and valuable byproducts can be combined together with recycling of solid and liquid wastes. A comparative analysis of energetic potential of biomass and various kinds of biofuels revealed that the most efficient way to produce energy is by direct burning of the plant biomass in a pelletized form, while the burning of such amount of the solid, liquid, or gaseous biofuel, which can be obtained from the plant material, gives a much smaller energetic effect. Novel types of pellets, as well as solid/liquid biofuels, having improved fuel characteristics are described.
- Reviewpp 1915-1963Pintiaux, T., Viet, D., Vandenbossche, V., Rigal, L., and Rouilly, A. (2015). "Binderless materials obtained by thermo-compressive processing of lignocellulosic fibers: A comprehensive review," BioRes. 10(1), 1915-1963.AbstractArticlePDF
As the worldwide demand for fuels and materials increases, fossil resources are decreasing and global warming is a concern, and thus the need for alternative solutions is high. In the industries of furniture and housing, particleboards are interesting materials, as they reutilize wastes from other industries (wood, agriculture) although they also rely on chemical binders that are petroleum-based and toxic. A very promising alternative is then clearly identified in finding ways to produce binderless boards and associated materials. This review considers the state of the art in the field of binderless board production, and other processes making it possible to turn raw plant fibers into structural materials without using any external chemistry. The mechanical properties and water resistance are collected and compared. Identified chemistry changes occurring during the thermo-compressive process are discussed with an aim towards understanding of the mechanisms of cohesion.
- Reviewpp 1964-1985Liu, Y., Ren, X., and Liang, J. (2015). "Antibacterial modification of cellulosic materials," BioRes. 10(1), 1964-1985.AbstractArticlePDF
The proliferation of bacteria on the surfaces of cellulosic materials during their use and storage can have negative effects on the materials themselves and on consumers. People’s demands for materials with antibacterial properties have been satisfied in recent years because of the emergence of various antibacterial compounds. This paper reviews recent research and development progress in antibacterial modification of cellulosic fibers using various biocides such as N-halamines, quaternary ammonium salts, chitosan, triclosan, and nanoparticles composed of noble metals and metal oxides. Antibacterial mechanisms and treating methods for antibacterial cellulosic materials are also involved in this paper.
- Reviewpp 6055-6080Gómez-de la Cruz, F. J., Casanova-Peláez, P. J., López-García, R., and Cruz-Peragón, F. (2015). "Review of the drying kinetics of olive oil mill wastes: Biomass recovery," BioRes. 10(3), 6055-6080.AbstractArticlePDF
The drying kinetics of olive oil mill wastes was analyzed based on experiments carried out by various researchers utilizing different drying systems. A critical review of the literature was done, and mathematical models of drying curves proposed by investigators were evaluated. A comparison between the best mathematical models of fit in the drying curves used in past experiments and a two-term Gaussian model was performed. This model improved all the results of fit in each experiment. Drying rates and drying stages were obtained and discussed. An average drying rate for each experiment from the two-term Gaussian model was calculated. This value allowed for visualizing and comparing the average speed of evaporated water in each experiment for the different dryers. Finally, and after having verified that almost all drying occurs mainly by a diffusion phenomenon, an analysis on the effective moisture diffusivity and activation energy values was performed. The results indicated that there was no dependency of these quantities on independent variables such as the drying air temperature, the drying air velocity, and the sample thickness. It follows that drying of olive oil mill wastes is a very complex physical process that depends heavily on aspects such as pieces of pit, pulp, skin, vegetation water, olive oil content, sugars and organics compounds of different nature.
- Reviewpp 6081-6094Yang, F., Jin, E. S., Zhu, Y., Wu, S., Zhu, W., Jin, Y., and Song, J. (2015). "A Mini-review on the applications of cellulose-binding domains in lignocellulosic material utilizations," BioRes. 10(3), 6081-6094AbstractArticlePDF
This manuscript provides a mini review on the fundamentals of cellulose binding domains (CBDs) or cellulose binding modules (CBMs) and their applications using lignocellulosic materials. CBDs, the non-productive part of cellulases, have miscellaneous biological functions and have been widely applied in lignocellulose hydrolysis, protein engineering, structural support, metabolism, energy storage, antibiosis, immunological recognition, targeting, attachment, etc. due to their specific affinity to various substrates of lignocelluloses. Understanding of the properties and mechanisms of CBDs is of vital significance because it provides the basis for fine manipulation of cellulose-CBM interactions and eventually improves the bioconversion performance of lignocelluloses into fuels and desired chemicals. In this short review, the fundamentals of CBD, the definition of CBM family, and the structures of different CBM families are introduced. Then recent findings in the applications of CBDs are discussed relative to the lignocelllulosic utilizations.
- Reviewpp 6095-6206Hubbe, M. A., Rojas, O. J., and Lucia, L. A. (2015). "Green modification of surface characteristics of cellulosic materials at the molecular or nano scale: A review," BioRes. 10(3), 6095-6206.AbstractArticlePDF
Many current and potential uses of cellulosic materials depend critically on the character of their surfaces. This review of the scientific literature considers both well-established and emerging strategies to change the outermost surfaces of cellulosic fibers or films not only in terms of chemical composition, but also in terms of outcomes such as wettability, friction, and adhesion. A key goal of surface modification has been to improve the performance of cellulosic fibers in the manufacture of composites through chemistries such as esterification that are enabled by the high density of hydroxyl groups at typical cellulosic surfaces. A wide variety of grafting methods, some developed recently, can be used with plant-derived fibers. The costs and environmental consequences of such treatments must be carefully weighed against the potential to achieve similar performances by approaches that use more sustainable methods and materials and involve less energy and processing steps. There is potential to change the practical performances of many cellulosic materials by heating, by enzymatic treatments, by use of surface-active agents, or by adsorption of polyelectrolytes. The lignin, hemicelluloses, and extractives naturally present in plant-based materials also can be expected to play critical roles in emerging strategies to modify the surfaces characteristics of cellulosic fibers with a minimum of adverse environmental impacts.
- Reviewpp 6207-6229Pereira, H. (2015). "The rationale behind cork properties: A review of structure and chemistry," BioRes. 10(3), 6207-6229.AbstractArticlePDF
Cork is a natural cellular material of biological origin with a combination of properties that make it suited for worldwide use as a wine sealant and insulation material. Cork has low density, is buoyant, is not very permeable to fluids, has a low thermal coefficient, exhibits elasticity and deformation without fracturing under compression, and has considerable durability. Such characteristics result from the features of its cellular structure, primarily its cell dimensions and topology, and from the chemical composition of the cell wall. The characteristics of the two main chemical components (suberin and lignin, which represent 53% and 26%, respectively, of the cell wall) have been analyzed. The limits of natural variation and their impacts on cork properties are discussed and used to define the material as “cork”.
- Reviewpp 6230-6261Reza, M., Kontturi, E., Jääskeläinen, A. S., Vuorinen, T., and Ruokolainen, J. (2015). "Transmission electron microscopy for wood and fiber analysis - A Review," BioRes. 10(3), 6230-6261.AbstractArticlePDF
This review describes use of transmission electron microscopy (TEM) in wood and fiber analysis. Analytical techniques and sample preparation methods are used to localize substructures of the cell wall polymers and are discussed in this review. The ultrastructural features of the wood cell walls, the structures formed by microfibrils, and the distribution of cell wall polymers, as revealed by TEM, are covered. Research investigating the distribution of lignin in tension and compression woods using TEM is reviewed. Different kinds of wood biodegrading enzymes localized using TEM are mentioned. Additional features of TEM, i.e., 3D imaging, analytical TEM, and electron diffraction are discussed. Lastly, a comparison between TEM and other imaging techniques used for wood and fiber research are made. Thus, this review provides insight into the contribution of TEM in wood research since its invention and demonstrates how to use it more effectively in the future.
- Reviewpp 6262-6284Nasir, M., Hashim, R., Sulaiman, O., Nordin, N. A., Lamaming, J., and Asim, M. (2015). "Laccase, an emerging tool to fabricate green composites: A review," BioRes. 10(3), 6262-6284.AbstractArticlePDF
In the last two decades, laccases have received much attention from researchers because of their specific ability to oxidize lignin. This function of laccase is very useful for applications in several biotechnological processes, including delignification in the pulp and paper industry and the detoxification of industrial effluents from the textile and petrochemical industries. This review focuses on laccase-mediated fiberboard synthesis. Growing concerns regarding the emission of formaldehyde from wood composites has prompted industrialists to consider the fabrication of green composites. Laccase-mediated fiber treatments oxidize the lignin component without affecting the cellulose structure. As a result, free radicals are generated on the fiber surface, and these can act as potential reactive sites for further cross-linking reactions in board manufacturing. Binderless fiberboards prepared using such methods can be considered as green composites because the manufacturing process involves no additional resin.