Review Articles
Latest articles
- Reviewpp 3136-3156Dungani, R., Jawaid, M., Abdul Khalil, H. P. S., Jasni, Aprilia, S., Hakeem, K. R., Hartati, S., and Islam, M. N. (2013). "A review on quality enhancement of oil palm trunk waste by resin impregnation: Future materials," BioRes. 8(2), 3136-3156.AbstractArticlePDF
Oil palm trunk (OPT) is a solid waste obtained in large quantities after the felling of oil palm trees and is available year-round. Scientists and industrialists face difficulties in utilizing these solid wastes for different applications due to great variations in their physical and mechanical properties. Because OPT consists of lignocellulosic materials, its cellulosic material is utilized in the production of panel products such as particleboard, medium density fibreboard, mineral-bonded particleboard, block board, and cement board. In order to control the OPT waste, it is essential to consider its alternative utilization inside buildings as lightweight construction materials and furniture. The impregnation of different resins in wood and non-wood materials can improve the quality of the OPT, making it possible to utilize OPT as raw materials for different applications. The enhanced properties and good appearance of impregnated OPT have found use in high-grade furniture and housing materials. In order to further evaluate its potential, this review has been compiled for the detailed study of various properties, characteristics, and applications of OPT.
- Reviewpp 3157-3176Iqbal, H. M. N., Kyazze, G., and Keshavarz, T. (2013). "Advances in the valorization of lignocellulosic materials by biotechnology: An overview," BioRes. 8(2), 3157-3176.AbstractArticlePDF
In view of the worldwide economic and environmental issues associated with the extensive use of petro-chemicals, there has been increasing research interest during the past decade in the value of residual biomass. Because of its renewable nature and abundant availability, residual biomass has attracted considerable attention as an alternate feedstock and potential energy source. To expand the range of natural bio-resources, significant progress related to the lignocellulose bio-technology has been achieved, and researchers have been re-directing their interests to biomass-based fuels, ligninolytic enzymes, chemicals, and biocompatible materials, which can be obtained from a variety of lignocellulosic waste materials. This review article focuses on the potential applications of lignocellulosic materials in biotechnology, including the production of bio-fuels, enzymes, chemicals, the pulp and paper, animal feed, and composites.
- Reviewpp 4775-4790Salem, M. Z. M., and Böhm, M. (2013). "Understanding of formaldehyde emissions from solid wood: An overview," BioRes. 8(3), 4775-4790.AbstractArticlePDF
Wood is known to contain and emit volatile organic compounds including formaldehyde. The emission of formaldehyde from wood increases during its processing to lumber and wood-based panels (i.e., particleboard and fiberboard). This increased emission can be attributed to the processing procedure of wood, which includes drying, pressing, and thermo-hydrolysis. Formaldehyde is emitted from wood under very high heat and is not expected to be a significant source of the emissions from composite wood products during normal service. Formaldehyde is also detectable even if wood has never been heated as well as under more or less ambient conditions. The presence of formaldehyde in the emissions from wood that does not contain adhesive resin has been explained by thermal degradation of polysaccharides in the wood. The emission levels of formaldehyde depend on factors such as wood species, moisture content, outside temperature, and time of storage. Additionally, the pyrolysis of milled wood lignin at 450 °C yields benzaldehyde, and the pyrolysis of spruce and pinewood at 450 °C generate formaldehyde, acetaldehyde, 2–propenal, butanal, and butanone, which can be attributed to the breakdown of the polysaccharide fraction of the wood.
- Reviewpp 6523-6555Chowdhury, Z. Z., Abd Hamid, S. B., Das, R., Hasan, M. R., Zain, S. M., Khalid, K., and Uddin, M. N. (2013). "Preparation of carbonaceous adsorbents from lignocellulosic biomass and their use in removal of contaminants from aqueous solution," BioRes. 8(4), 6523-6555.AbstractArticlePDF
The feasibility of using lignocellulosic biomass as a source for preparing carbon adsorbents has received rigorous attention over the last few decades. Many studies have discussed its great potential as a renewable feedstock for preparation of carbonaceous adsorbent materials. This review paper provides an overview of the different types of carbonization techniques that so far have been applied to convert lignocellulosic biomass to carbon adsorbents. The effects of various process parameters on the conventional pyrolysis process are reviewed. The paper focuses on the mechanism for the formation of carbons, its wide variety of applications for waste effluents, and the regeneration techniques so far adopted by researchers. Low-cost carbons derived from lignocellulosic biomass have demonstrated excellent capabilities for the removal of organic and inorganic contaminants, including some pharmaceutical compounds, from the waste aqueous stream.
- Reviewpp 6556-6629Hubbe, M. A., Ayoub, A., Daystar, J. S., Venditti, R. A., and Pawlak, J. J. (2013). "Enhanced absorbent products incorporating cellulose and its derivatives: A Review," BioRes. 8(4), 6556-6629.AbstractArticlePDF
Cellulose and some cellulose derivatives can play vital roles in the enhancement of the performance of absorbent products. Cellulose itself, in the form of cellulosic fibers or nano-fibers, can provide structure, bulk, water-holding capacity, and channeling of fluids over a wide dimensional range. Likewise, cellulose derivatives such as carboxymethylcellulose (CMC) have been widely studied as components in superabsorbent polymer (SAP) formulations. The present review focuses on strategies and mechanisms in which inclusion of cellulose – in its various forms – can enhance either the capacity or the rate of aqueous fluid absorption in various potential applications.
- Reviewpp 6630-6649Rodrigues, J. N., Dias, A. M. P. G., and Providência, P. (2013). "Timber-concrete composite bridges: State-of-the-art review," BioRes. 8(4), 6630-6649.AbstractArticlePDF
This review article presents a state-of-the-art survey on timber-concrete composite (TCC) bridges. It starts with a presentation of a sample of relevant TCC bridges, offering a global perspective on the use of this type of bridge. The number of TCC bridges has clearly increased in the past few years, and some of the reasons for this trend are explored. Next, an extensive literature review is presented regarding the most significant technological innovations and recent developments in the application of TCC structures to bridge construction. Firstly, the engineering specificities and the advantages of TCC bridge structural systems are enumerated. Afterwards, the importance of proper mechanical connection for optimal performance of TCC structures is explained, and a thorough description of the connection systems suitable for bridge construction is provided. Some research into the structural behavior of TCC bridges under service conditions is then presented and discussed. Finally, possible areas of future research regarding the development of TCC bridges are suggested.
- Reviewpp 1606-1633Rajkumar, R., Yaakob, Z., and Takriff, M. S. (2014). "Potential of the micro and macro algae for biofuel production: A brief review," BioRes. 9(1), 1606-1633.AbstractArticlePDF
The world seems to be raising its energy needs owing to an expanding population and people’s desire for higher living standards. Diversification biofuel sources have become an important energy issue in recent times. Among the various resources, algal biomass has received much attention in the recent years due to its relatively high growth rate, its vast potential to reduce greenhouse gas (GHG) emissions and climate change, and their ability to store high amounts of lipids and carbohydrates. These versatile organisms can also be used for the production of biofuel. In this review, sustainability and the viability of algae as an up-coming biofuel feedstock have been discussed. Additionally, this review offers an overview of the status of biofuel production through algal biomass and progress made so far in this area.
- Reviewpp 1634-1763Hubbe, M. A. (2014). "Prospects for maintaining strength of paper and paperboard products while using less forest resources: A Review,"BioRes. 9(1), 1634-1763.AbstractArticlePDF
Paper production requires large amounts of cellulosic fiber, whereas the world’s forested lands and croplands have a finite capacity to supply such resources. To deal with likely future pressure on forest resources, as well as to hold down costs of materials, publications examined in the preparation of this review suggest that the paper industry will need to implement several concurrent strategies. In particular, the industry can be expected to view recycling as a central part of its activities. Basis weights of various paper-based products can be expected to decrease over the coming decades, and more of the fiber content will be replaced with fillers such as calcium carbonate. Such trends will place intense demands upon chemical-based strategies to enhance the bonding within paper and paperboard. Based on the literature, further progress in reducing the amount of new forest resources used to meet a given set of paper product requirements will require a combined approach, taking into account various fiber attributes, nanostructures, novel concepts in bond formation, and advances in the unit operations of papermaking.
- Reviewpp 1764-1786Zhu, X., Kim, B.-J., Wang, Q., and Wu, Q. (2014). "Recent advances in the sound insulation properties of bio-based materials," BioRes. 9(1), 1764-1786.AbstractArticlePDF
Many bio-based materials, which have lower environmental impact than traditional synthetic materials, show good sound absorbing and sound insulation performances. This review highlights progress in sound transmission properties of bio-based materials and provides a comprehensive account of various multiporous bio-based materials and multilayered structures used in sound absorption and insulation products. Furthermore, principal models of sound transmission are discussed in order to aid in an understanding of sound transmission properties of bio-based materials. In addition, the review presents discussions on the composite structure optimization and future research in using co-extruded wood plastic composite for sound insulation control. This review contributes to the body of knowledge on the sound transmission properties of bio-based materials, provides a better understanding of the models of some multiporous bio-based materials and multilayered structures, and contributes to the wider adoption of bio-based materials as sound absorbers.
- Reviewpp 1787-1823Chowdhury, Z. Z., Mohd. Zain, S., Abd Hamid, S. B., and Khalid, K. (2014). "Catalytic role of ionic liquids for dissolution and degradation of biomacromolecules," BioRes. 9(1), 1787-1823.AbstractArticlePDF
Natural biomacromolecules constitute a diverse feedstock, including carbohydrate-based polysaccharides (cellulose, hemicellulose, starch, agarose, and Konjac glucomannan) together with lignin — extracted mainly from biomass — and other protein based polymers, namely keratin, chitin, chitosan, and silk fibroin. The complex and heterogeneous chemical structure of biomacromolecules makes them difficult to dissolve and disintegrate into simpler molecules for further applications. In this regard, ionic liquids are potential solvents for the dissolution and modification of long chain biopolymers. This provides a promising pretreatment technology and is known to allow adequate extraction of biopolymers from natural sources. This paper highlights the properties of ionic liquids for their use as versatile solvents. This review provides a critical outlook regarding the influence of several process parameters that govern the fractionation of biomacromolecules into their constituent elements and further pretreatment processes. The performance of different types of ionic liquids for processing of biomacromolecules, focusing on their pertinent capability as catalysts to enhance the rate of hydrolysis, also is discussed in this article.